多元质量损失模型的系数确定

工业工程 ›› 2012, Vol. 15 ›› Issue (3): 80-82.

多元质量损失模型的系数确定

1.南京工业大学工业工程系, 南京 210009; 2.CS Corporation, New York, NY 10038 USA

出版日期:2012-06-30 发布日期:2012-07-21
作者简介:樊树海(1975-), 男, 江苏省人, 副教授,博士, 主要研究方向为质量控制、仿真与虚拟制造.

Coefficient Determination of Multivariate Quality Loss Model

1. Department of Industrial Engineering, Nanjing University of Technology, Nanjing 210009, China; 2.CS Corporation, New York, NY 10038 USA

Online:2012-06-30 Published:2012-07-21
Supported by:
国家自然科学基金资助项目(71171110,70801036);江苏省自然科学基金资助项目(BK2010555); 教育部人文社科基金资助项目(11YJCZH184)〖

摘要/Abstract

摘要： 依据质量参数指标的共作用及互作用效应，对田口的基于绝对质量偏移的单变量质量损失模型进行扩展。在建立了基于相对质量偏移的多元质量损失模型的基础上，对于多元质量损失模型的核心问题（系数确定问题），提出了系数确定的容差法。

关键词: 田口质量损失模型, 仿真, 质量控制

Abstract: The quality loss model proposed by Genichi Taguchi in the early 1970s is based on the absolute deviation and it is a oneorder model. However, in practice, product quality is affected by multiple factors with correlation. Thus, in this paper, the Taguchis quality loss model is expanded in considering the relative deviation of the quality indices. First, a 2order multivariate quality model is presented. Then, this model is successfully extended to models with 3 or even higher order. The 2order model is then simplified to build a multivariate quality loss model. A method is proposed to determinate the coefficients in the model. Detailed procedure for the method is described.

Key words: Taguchi quality loss model, simulation, quality control

樊树海1, Amanda Elizabeth2. 多元质量损失模型的系数确定[J]. 工业工程, 2012, 15(3): 80-82.

Fan Shuhai1, Amanda Elizabeth2. Coefficient Determination of Multivariate Quality Loss Model[J]. Industrial Engineering Journal , 2012, 15(3): 80-82.

参考文献

［1］Taguchi Genichi. Quality engineering［M］. Beijing: China Translation and Publishing Corporation，1985：12. ［2］Routara B C, Mohanty S D, Datta S, et al. Combined quality loss (CQL) concept in WPCAbased Taguchi philosophy for optimization of multiple surface quality characteristics of UNS C34000 brass in cylindrical grinding［J］. International Journal of Advanced Manufacturing Technology,2010,51(1-4):135-143. ［3］Chen ChungHo, Chang WanLin. Optimal design of expected lifetime and warranty period for product with quality loss and inspection error［J］. Expert Systems with Applications,2010,37(4):3521-3526. ［4］Fan Shuhai. Studies on grey theory based intelligent methods and their applications to MCMQC［D］. Beijing:Tsinghua University,2004:6. ［5］Zhang Gongxu. New quality management［M］. Beijing: Higher Education Press,1998. ［6］樊树海, 肖田元. 多元产品质量损失模型的建立与仿真［J］.工业工程与管理, 2008,13(2):51-55. Fan Shuhai,Xiao Tianyuan.The simulation of multivariate product quality model［J］.Industrial Engineering and Management,2008,13(2):51-55. ［7］Morita Maiko, Arizono Ikuo, Takemoto Yasuhiko. Variable sampling inspection plans with screening for assuring average outgoing surplus quality loss limit indexed by Taguchi’s loss［J］. International Journal of Advanced Manufacturing Technology, 2009,41(9-10):908-915. ［8］Zhu Mingquan. Artificial neural network approach of quality control for intelligent manufacturing system［J］. Acta Aeronautica et Astronautica Sinica,1997,18(5):603-606. ［9］Niaki S T A,Davoodi M. Designing a multivariate multistage quality control system using artificial neural networks［J］. International Journal of Production Research,2009,47(1):251-271. ［10］Marengo Emilio, Longo Valentina, Robotti Elisa. Development of calibration models for quality control in the production of ethylene/propylene copolymers by FTIR spectroscopy, multivariate statistical tools, and artificial neural networks［J］. Journal of Applied Polymer Science,2008, 109(6):3975-3982.

[1]	李广振, 徐志刚, 刘松凯, 任朝晖. 装配线仿真流程及其案例研究[J]. 工业工程, 2021, 24(5): 152-158.
[2]	廖志华, 刘建军, 陈庆新, 毛宁. 负荷型对偶单元授权卡片交叠循环系统性能仿真[J]. 工业工程, 2021, 24(4): 100-111.
[3]	李思瀚, 莫超雄, 刘建军, 陈庆新, 毛宁. 物料齐套时间不确定的多地总装作业前摄性调度[J]. 工业工程, 2021, 24(3): 104-114.
[4]	彭辉, 赵宁, 孙阳君. 面向货到人拣货机器人系统的数字孪生系统[J]. 工业工程, 2021, 24(3): 121-129.
[5]	刘珈琪, 刘继才, 雷晓莹. PPP项目政府激励与社会资本努力的演化博弈与仿真[J]. 工业工程, 2021, 24(2): 77-84.
[6]	李俊亭, 郑明珠, 赛云秀. 施工作业人员不安全行为干预策略仿真研究[J]. 工业工程, 2021, 24(1): 111-116.
[7]	李锋, 余菡. 模仿创新企业进入时机和动态定价联合决策问题研究[J]. 工业工程, 2020, 23(5): 11-21,95.
[8]	曾垂飞, 刘建军, 陈庆新, 毛宁. 装配作业车间分批调度问题的算法对比[J]. 工业工程, 2020, 23(4): 174-182.
[9]	熊国强, 雷嘉烨. 基于突发事件的城市地铁客流应急疏散模型与仿真分析[J]. 工业工程, 2020, 23(3): 99-106.
[10]	陈瑾标, 陈庆新, 毛宁, 彭乘风, 俞爱林. 带检测环节的制造单元布局优化[J]. 工业工程, 2020, 23(3): 107-114,131.
[11]	赵慧娟, 姜盼松, 黄文聪. 基于图像识别算法的图像传感器质量检测方法改善研究[J]. 工业工程, 2020, 23(3): 115-122.
[12]	毛亚兰, 张锦. 考虑乘客不完全理性行为的轨道交通车站应急疏散方法研究[J]. 工业工程, 2020, 23(3): 138-144,153.
[13]	刘洪伟, 胡琪, 徐冉, 王明洁. 基于直线往复单智能RGV系统单工序调度研究[J]. 工业工程, 2020, 23(2): 34-40.
[14]	范定祥, 李重莲. 网购供应链质量控制的策略研究[J]. 工业工程, 2020, 23(1): 104-111.
[15]	季孟忠, 何达, 邱梦宁, 黄益槐, 彭俊, 项薇. 密集到达下的预约决策的仿真研究[J]. 工业工程, 2020, 23(1): 134-142.