模具生产车间情景仿真建模

工业工程 ›› 2012, Vol. 15 ›› Issue (3): 115-121.

模具生产车间情景仿真建模

广东工业大学机电工程学院，广东广州 510090

出版日期:2012-06-30 发布日期:2012-07-21
作者简介:俞爱林(1975-),男,讲师，博士研究生,主要研究方向制造系统设计及仿真优化、制造业信息化.
基金资助:
国家自然科学基金资助项目(50675039)；国家863计划CIMS项目资助（2006AA04Z132）；广东省自然科学基金团队项目(05200197)；广东省科技攻关项目(2004B10201030)

Modeling for ScenarioSimulation in a Mold Production Workshop

School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510090, China

Online:2012-06-30 Published:2012-07-21

摘要/Abstract

摘要： 针对模具生产过程的复杂性，一般的数学建模又难以全面描述模具生产车间的运作过程，采用面向对象的仿真技术对模具制造系统进行建模，并通过与模具企业的ERP生产管理系统模块建立数据接口，以实际生产数据驱动仿真运行。提出了构建模具制造过程情景仿真系统的总体思路和方法，开发了某模具企业某车间的情景仿真系统，并通过该车间实际模具交货期和仿真系统预测的模具交货期进行对比，验证了该情景仿真系统的有效性。

关键词: 模具生产, 仿真建模, 交货期

Abstract: Due to the complexity of mold production process, it is very difficult to model operation flows in a workshop by using a mathematical model. However, the operational state of mold manufacturing system can be visualized by simulation with objectoriented technology. Furthermore, interface can be developed between the simulation system and the ERP production management subsystem such that realtime data can be used to drive the simulation system. With this idea in mind, a scenariosimulation prototype system is developed. With this system, simulation can be made to reflect the reality by adjusting the systemparameters online. By simulation, one can estimates the completion date of a mold order. This date can be used as due date in order processing. This system has been tested in a mold manufacturing company and results show that it is effective and reliable.

Key words: mold production, modeling for simulation, due date estimation

俞爱林，黎近秋，毛宁，陈庆新. 模具生产车间情景仿真建模[J]. 工业工程, 2012, 15(3): 115-121.

Yu Ailin， Li Jinqiu， Mao Ning， Chen Qingxin. Modeling for ScenarioSimulation in a Mold Production Workshop[J]. Industrial Engineering Journal , 2012, 15(3): 115-121.

参考文献

［1］Jerry Banks,John S Carson,Barry L Nelson,David M Nicol. Discrete-Event System Simulation［M］.Beijing:China Machine Press,2007. ［2］刘建军,陈庆新,毛宁.基于能力验证的模具交货期可行性分析方法［J］.计算机集成制造系统，2009，15（3）:618-624. Liu Jianjun, Chen Qinxin, Mao Ning. Approach to establish reliable due dates of mould based on capacity check［J］. Computer Integrated Manufacturing Systems, 2009, 15（3）:618-624. ［3］陈超,陈庆新,毛宁.考虑多关键路径的随机项目进度监视模型［J］.计算机集成制造系统，2008，14（11）:2167-2174. Chen Chao, Chen Qinxin, Mao Ning. Stochastic project process monitoring model with multicritical paths［J］. Computer Integrated Manufacturing Systems, 2008,14（11）:2167-2174. ［4］彭杰,陈庆新,毛宁,等.嵌入随机概率模型的模具项目模板及其应用［J］.模具工业，2007，33（8）:1-5. Peng Jie,Chen Qinxin,Mao Ning,et al. Application of die or mould project template embedded with stochastic probability model［J］. Die & Mould Industry, 2007,33（8）:1-5.［5］Leung Y K, Choy K L,Kwong C K. A real time hybrid informationsharing and decision support system for the mould industry［J］.Journal of High Technology Management Research,2010,21(1):64-77. ［6］黎文瑞,陈庆新,毛宁,等.随机生产环境下的模具制造单元资源配置［J］.计算机集成制造系统，2007，13（11）:2189-2194. Li Wenrui, Chen Qinxin, Mao Ning,et al. Resource allocation of mould manufacturing cell in environment of stochastic production［J］. Computer Integrated Manufacturing Systems, 2007, 13（11）:2189-2194. ［7］张毕西,谢祥添.基于BP神经网络多品种、小批量、订单式的生产交货期预测问题研究［J］.价值工程,2007,26（8）:11-13. Zhang Bixi,Xie Xiangtian. Produced delivery date forecast problems studying about multiple products small lot order form basing on BP neural networks［J］.Value Engineer, 2007,26（8）:11-13. ［8］廖仁,陈庆新,毛宁.模具虚拟企业项目调度遗传算法研究［J］ .计算机集成制造系统，2004，10（7）:815-819. Liao Ren, Chen Qinxin, Mao Ning. Genetic algorithm for resourceconstrained project scheduling［J］. Computer Integrated Manufacturing Systems, 2004, 10（7）: 815-819. ［9］侯扬,范秀敏,严隽琪,等. 基于仿真的制造系统对象建模及其应用［J］.计算机集成制造系统，2001，7（5）:42-46. Hou Yang,Fan Xiumin,Yan Junqi, et al. Simulation of manufacturing systems based on object modeling and its application［J］. Computer Integrated Manufacturing Systems, 2001, 7（5）:42-46. ［10］Bondarev E,Muskens J,de With P.Predicting real time properties of component assemblies: ascenario simulation approach［DB/OL］.［2004-09-20］. http:∥ieeexplore.ieee.org/. ［11］陈庆新,毛宁,刘建军,等.模具企业生产组织结构与项目管理原则［J］.模具工业，2008，34（9）：11-15. Chen Qinxing,Mao Ning,Liu Jianjun,et al. Production organization structure and principles of project management for die & mould companies［J］.Die & Mould Industry,2008,34（9）:11-15.

[1]	陈敏, 黎展滔, 陈庆新, 彭乘风. 考虑有限物流运输能力的智能车间AGV调度算法研究[J]. 工业工程, 2019, 22(4): 49-57.
[2]	潘星明, 童海星, 徐超, 项薇, 陈赛峰. 基于地震模式的医院应急资源激增能力储备规划研究[J]. 工业工程, 2018, 21(2): 62-67.
[3]	谢洁明, 毛宁, 陈庆新. 随机性因素对机器人单元性能的影响分析[J]. 工业工程, 2017, 20(6): 84-89,95.
[4]	丁雪峰，刘佳. 考虑客户到达时刻的农村“货运班线”物流服务定价策略[J]. 工业工程, 2016, 19(4): 18-24.
[5]	刘蕾, 王云盛, 朱强刚. 考虑订单合批批量的在线制造商承诺交货期决策研究[J]. 工业工程, 2014, 17(4): 13-17.
[6]	王文龙, 张毕西. MTO运营模式的订单交货期决策模型[J]. 工业工程, 2014, 17(2): 132-135.
[7]	胡盛强，张毕西，张湘伟. MTO生产模式的完工期预测及承诺交货期决策[J]. 工业工程, 2012, 15(3): 122-129.
[8]	杨丽1, 2，3，张文新1, 2，涂雪平1, 2,4，张文学1, 2,5. 钢铁企业订单动态交货期承诺模型与算法[J]. 工业工程, 2011, 14(6): 31-37.