RFID增加回收率的再制造闭环供应链模型

工业工程

RFID增加回收率的再制造闭环供应链模型

合肥工业大学管理学院，安徽合肥 230009

出版日期:2016-10-31 发布日期:2017-02-21
作者简介:杨爱峰(1976-)，女，河南省人，副教授，博士，主要研究方向为供应链管理.
基金资助:
国家自然科学基金青年科学基金资助项目（71301038），安徽省自然科学基金资助项目（1508085QG148），江苏省机电产品循环利用技术重点建设实验室开放基金资助项目

Remanufacturing Closed-loop Supply Chain Models by Applying RFID to Increase Recovery Rate

School of Management, Hefei University of Technology, Hefei 230009, China

Online:2016-10-31 Published:2017-02-21
Supported by:
radio frequency identification; closed-loop supply chain; remanufacturing; recovery rate

摘要/Abstract

摘要：

在再制造闭环供应链的实践中，从市场上回收废旧品是一个关键环节，同时也是一个难点。而本文假设RFID可以提高废旧品的回收率，同时也要花费相应的成本。为对比分析RFID使用前后的效果，按照负责回收的供应链成员不同，建立了一体化和非一体化的再制造闭环供应链模型，并讨论了使用RFID额外增加回收率规模、RFID标签成本和RFID固定投入成本对供应链定价决策及各成员利润的影响。

关键词: 射频识别, 闭环供应链, 再制造, 回收率

Abstract:

In the remanufacturing closedloop supply chain practices, recycling used products is a critical activity, and is also a difficult point. The technology of radio frequency identification (RFID) is introduced into the recycling activities of waste products, assuming that it can increase the recycling rate while taking corresponding costs. In order to compare the effects before and after using RFID, both centralized and decentralized supply chain models are created with different participants in waste product collection. And the impacts of scaling parameter for additional increased recovery rate with RFID, RFID tag cost and fixed cost on the pricing decisions and the profits of participants in different models are all analyzed.

杨爱峰，万偲，刘林，胡小建. RFID增加回收率的再制造闭环供应链模型[J]. 工业工程.

YANG Aifeng, WAN Si, LIU Lin, HU Xiaojian. Remanufacturing Closed-loop Supply Chain Models by Applying RFID to Increase Recovery Rate[J]. Industrial Engineering Journal .

参考文献

［1］SEITZ M, PEATTIE K. Meeting the closed-loop challenge: the case of remanufacturing［J］. California Management Review, 2004, 46(2): 74-89.

［2］TOKTAY L B, WEIN M, ZENIOS S A. Inventory management of remanufacturable products［J］. Management Science, 2000, 46(11): 1412-1426.

［3］JABER M Y, EL SAADANY A M A. The production, remanufacture and waste disposal model with lost sales［J］. International Journal of Production Economics, 2009, 120(1): 115-124.

［4］EL SAADANY A M A, JABER M Y. A production/remanufacturing inventory model with price and quality dependent return rate［J］. Computers & Industrial Engineering, 2010, 58(3): 352-362.［5］ZIKOPOULOS C, TAGARAS G. Impact of uncertainty in the quality of returns on the profitability of a single-period refurbishing operation［J］. Production, Manufacturing and Logistics, 2007, 182(1): 205-225.

［6］BAKAL I S, AKCALI E. Effects of random yield in remanufacturing with price sensitive supply and demand［J］. Production and Operations Management, 2006, 15(3): 407-420.

［7］黄永，孙浩，达庆利. 随机弹性需求下的再制造闭环供应链的协调机制研究［J］. 工业工程, 2012, 15(6): 63-69.

HUANG Yong, SUN Hao, DA Qingli. Coordination of closedloop remanufacturing supply chain with stochastic and flexible demands［J］. Industrial Engineering Journal, 2012, 15(6): 63-69.

［8］LI X, LI Y J, CAI X Q. Remanufacturing and pricing decisions with random yield and random demand［J］.Computers & Operations Research, 2015, 54(1): 195-203.

［9］WU C H. Product design and pricing strategies with remanufacturing［J］. European Journal of Operational Research, 2012, 222(2): 204-215.

［10］DE GIOVANNI P, ZACCOUR G.Cost revenue sharing in a closed loop supply chain［J］. Annals of the International Society of Dynamic Games, 2013, 12(3), 395-421.

［11］GUIDE V D R, JAYARAMAN V, SRIVASTAVA R, BENTON W C. Supply chain management for recoverable manufacturing systems［J］. Interfaces, 2000, 30(3): 125-142.

［12］熊中楷, 黄德斌, 熊榆. 政府奖励条件下基于再制造的闭环供应链模式［J］. 工业工程, 2011, 14(2): 1-5.

XIONG Zhongkai, HUANG Debin, XIONG Yu. On the closed-loop supply chain modes of product remanufacturing with government reimbursement［J］. Industrial Engineering Journal, 2011, 14(2): 1-5.

［13］CHOI T M, LI Y J, XU L. Channel leadership, performance and coordination in closed loop supply chains［J］. Int. J. Production Economics, 2013, 146(1): 371-380.

［14］SARAC A, ABSI N, DAUZEREPERES S. A literature review on the impact of RFID technologies on supply chain management［J］. International Journal of Production Economics, 2010, 128(4): 77-95.

［15］NATIVI J J, LEE S. Impact of RFID information sharing strategies on decentralized supply chain with reverse logistics operations［J］. International Journal of Production Economics, 2012, 136(2): 366-377.

［16］USTUNDAG A, TANYAS M. The impacts of radio frequency identification (RFID) technology on supply chain costs［J］. Transportation Research Part E Logistics & Transportation Review, 2009, 45(1): 29-38.

［17］FAN T J, CHANG X Y, GU C H, et al. Benefits of RFID technology for reducing inventory shrinkage［J］. International Journal of Production Economics, 2014, 147(2): 659-665.

［18］KIM T, CHRISTOPH H G. On the use of RFID in the management of reusable containers in closed-loop supply chains under stochastic container return quantities［J］. Transportation Research Part E. 2014, 64(1): 12-27.

［19］FAN T J, FENG T, DENG S, et al. Impact of RFID technology on supply chain decisions with inventory inaccuracies［J］. International Journal of Production Economics, 2015, 159(1): 117-125.

[1]	董海, 吴瑶. 基于PIWOA的绿色闭环供应链网络多目标模糊优化设计[J]. 工业工程, 2021, 24(4): 27-35.
[2]	曹炳汝, 朱博文. 考虑再制造投资的闭环供应链网络均衡模型[J]. 工业工程, 2021, 24(3): 1-9.
[3]	李芳, 马艳, 王豪丽. 制造商主导下差别主体努力的闭环供应链决策研究[J]. 工业工程, 2021, 24(2): 27-33.
[4]	路正南, 杨鹏. 考虑回收品质量可控的再制造闭环供应链决策[J]. 工业工程, 2021, 24(1): 27-34.
[5]	尚春燕, 关志民, 米力阳. 政府干预下考虑双重行为偏好特征的闭环供应链决策与协调[J]. 工业工程, 2021, 24(1): 35-43.
[6]	罗福周, 王文心. 考虑产品绿色度的闭环供应链政府补贴策略研究[J]. 工业工程, 2020, 23(6): 18-27.
[7]	户佐安, 贾叶子. 基于EPR的废旧电器闭环供应链博弈分析[J]. 工业工程, 2020, 23(6): 35-41,67.
[8]	邢光军, 李云云. 考虑消费者绿色偏好的竞争性闭环供应链生产决策研究[J]. 工业工程, 2020, 23(5): 22-29.
[9]	孙旭, 吴忠. 不同市场主导者下的以旧换再回收模型[J]. 工业工程, 2020, 23(5): 169-175.
[10]	肖敏, 张耀. 双重干预及产能约束下的闭环供应链决策研究[J]. 工业工程, 2020, 23(4): 28-35.
[11]	张敏, 李思雨, 石纯来, 廖治通. 基于微分对策的闭环供应链中制造商合作策略选择[J]. 工业工程, 2020, 23(3): 19-29.
[12]	舒秘. 不同渠道结构下再制造商进入对制造商定价的影响[J]. 工业工程, 2020, 23(3): 30-37.
[13]	陈伟达, 史郁洁. 碳交易政策下考虑渠道拓展的制造/再制造企业生产决策研究[J]. 工业工程, 2020, 23(2): 1-8.
[14]	田立平, 李璐璐, 李文龙. 基于专利保护下闭环供应链的快递包装回收定价研究[J]. 工业工程, 2020, 23(1): 81-86.
[15]	陈伟达, 史文瑾. 资金约束下考虑碳配额质押融资的制造/再制造生产决策研究[J]. 工业工程, 2019, 22(3): 1-8.