结合解释结构模型与网络分析法于FMEA的应用

doi:10.3969/j.issn.1007-7375.2020.04.020

工业工程 ›› 2020, Vol. 23 ›› Issue (4): 154-158.doi: 10.3969/j.issn.1007-7375.2020.04.020

结合解释结构模型与网络分析法于FMEA的应用

陈日光

肇庆学院经济与管理学院，广东肇庆 526061

收稿日期:2019-06-05 发布日期:2020-08-21
作者简介:陈日光(1968-)，男，台湾省人，副教授，博士，主要研究方向为质量管理、系统工程

Application of Combining Interpretative Structure Model and Analytic Network Process with FMEA

CHEN Jihkuang

Economics & Management College, Zhaoqing University, Zhaoqing 526061, China

Received:2019-06-05 Published:2020-08-21

摘要/Abstract

摘要： 引入解释结构模型法，分析出控制措施之间的层次、顺序关系，再用网络分析法考虑控制措施间的相依关系，进行客观权重的计算，作为FMEA中的新探测度，再进行新RPN的计算。以回炉焊接制程提升为研究案例，比较新方法与传统方法的差异，发现优先改善项目与改善顺序的不同产生不同结果，提升了改善的效果。

关键词: 失效模式与效应分析(FMEA), 解释结构模型(ISM), 网络分析法(ANP)

Abstract: Interpretative structural modeling (ISM) is introduced to analyze the level and sequence relationship between the control actions, and then the analytic network process (ANP) is used to consider the dependent relationship between the control actions, to calculate the objective weight as a new Detection values, and then the calculation of the new RPN is carried out. Taking the poor furnace welding process as a study case, the difference between the new method and the traditional method is compared, and the different results of priority improvement order are obtained and the effect improved.

Key words: failure mode and effect analysis(FMEA), interpretative structural modeling(ISM), analytic network process(ANP)

中图分类号:

F402

陈日光. 结合解释结构模型与网络分析法于FMEA的应用[J]. 工业工程, 2020, 23(4): 154-158.

CHEN Jihkuang. Application of Combining Interpretative Structure Model and Analytic Network Process with FMEA[J]. Industrial Engineering Journal, 2020, 23(4): 154-158.

参考文献

[1] 雷星晖, 莫凡. 基于FMEA方法的知识产权流程管理模式构建[J]. 科技管理研究, 2010, 30(4): 202-204+178
LEI Xinghui, MO Fan. Construction of intellectual property process management model based on FMEA method[J]. Science and Technology Management Research, 2010, 30(4): 202-204+178
[2] 朱宗乾, 罗阿维, 李艳霞, 等. 采用FMEA的ERP项目实施风险分析方法[J]. 工业工程, 2010, 13(6): 1-5
ZHU Zongqian, LUO Awei, LI Yanxia, et al. The risk analysis method is implemented using FMEA’s ERP project[J]. Industrial Engineering Journal, 2010, 13(6): 1-5
[3] 奉小斌. 集群新创企业平行搜索风险的识别、度量与控制—基于FMEA原理[J]. 技术经济, 2015, 34(4): 42-50
FENG Xiaobin. Identification, measure and control of parallel search risk of cluster-based new-generation enterprise—based on FMEA principle[J]. Technology Economics, 2015, 34(4): 42-50
[4] 王则灵, 尤建新. 基于FMEA方法的高技术企业知识产权风险预警研究[J]. 科学管理研究, 2017, 35(1): 71-74+90
WANG Zeling YOU Jianxin. Research on intellectual property risk early warning of high-tech enterprises based on FMEA method[J]. Scientific Management Research, 2017, 35(1): 71-74+90
[5] 韩亚娟, 尹纯, 彭运芳, 等. 基于FMEA的网购服务失误预防模型[J]. 工业工程与管理, 2017, 22(5): 114-119+127.
HAN Yajuan, YI Chun, PENG Yunfang, et al. Error prevention model of online purchasing service based on FMEA[J]. Industrial Engineering and Management, 2017, 22(5): 114-119+127.
[6] GILCHRIST W. Modeling failure modes and effects analysis[J]. International Journal of Quality & Reliability Management, 1993, 10(5): 16-23
[7] BEN-DAYA M. RAOUF A. A revised failure mode and effects analysis model[J]. International Journal of Quality Reliability Management, 1993, 13(1): 43-47
[8] LIU H C, LIU L, LIU N. Risk evaluation approaches in failure mode and effects analysis: A literature review[J]. Expert Systems with Applications, 2013, 40(2): 828-838
[9] 门峰. 模糊集理论与灰色关联理论的FMEA方法[J]. 工业工程, 2008, 11(4): 109-112+117
MEN Feng. FMEA method of fuzzy set theory and grey relational theory[J]. Industrial Engineering Journal, 2008, 11(4): 109-112+117
[10] 刘胧, 刘虎沉, 林清恋. 基于模糊证据推理和灰色关联理论的FMEA方法[J]. 模糊系统与数学, 2011, 25(2): 71-90
LIU Long, LIU Huchen, LIN Qinglian. FMEA method based on Fuzzy evidence reasoning and grey relational theory[J]. Fuzzy Systems and Mathematics, 2011, 25(2): 71-90
[11] 荆树伟, 温志芳, 阎俊爱. 基于FMEA和模糊VIKOR的煤炭开采企业风险识别[J]. 工业工程, 2017, 20(2): 91-98
JING Shuwei, WEN Zhifang, YAN Junai. Risk identification of coal mining enterprises based on FMEA and fuzzy VIKOR[J]. Industrial Engineering Journal, 2017, 20(2): 91-98
[12] BRAGLIA M, BEVILACQUA M. Fuzzy modeling and analytical hierarchy processing as a means of quantifying risk levels associated with failure modes in production systems[J]. Technology, Law and Insurance, 2000, 5(3-4): 125-134
[13] CARMIGNANI G. An integrated structural framework to cost-based FMECA: The priority-cost FMECA[J]. Reliability Engineering and Systems Safety, 2009, 94(4): 861-871
[14] HU A H, HSU C W, KUO T C, et al. Risk evaluation of green components to hazardous substance using FMEA and FAHP[J]. Expert Systems with Applications, 2009, 36(3): 7142-7147
[15] ZAMMORI F, GABBRIELLI R. ANP/RPN: a multi criteria evaluation of the risk priority number[J]. Quality and Reliability Engineering International, 2011, 28(1): 85-104
[16] 周红, 刘洋. 结合FAHP 和频率分析的地铁工程FMEA 风险评价应用研究[J]. 工程管理学报, 2015, 29(1): 53-58
ZHOU Hong, LIU Yang. Application research on the risk assessment of subway project FMEA based on FAHP and frequency analysis[J]. Journal of Engineering Management, 2015, 29(1): 53-58
[17] 辛昱, 郑金忠, 张梁, 等. 基于AHP-FMEA 的航材仓库选址合理性评价研究[J]. 兵工自动化, 2016, 35(6): 80-83+93
XIN Yu, ZHENG Jinzhong, ZHANG Liang, et al. Research on rationality evaluation of air material warehouse location based on AHP-FMEA[J]. Ordnance Industry Automation, 2016, 35(6): 80-83+93
[18] WARFIELD J N. On arranging elements of a hierarchy in graphic form[J]. IEEE Transactions on Systems Man and Cybernetics, 1973, SMC-3(2): 121-132

结合解释结构模型与网络分析法于FMEA的应用

Application of Combining Interpretative Structure Model and Analytic Network Process with FMEA

RichHTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价