预制构件厂精益设计方案评价研究

doi:10.3969/j.issn.1007-7375.2020.00.019

工业工程 ›› 2020, Vol. 23 ›› Issue (5): 140-148.doi: 10.3969/j.issn.1007-7375.2020.00.019

预制构件厂精益设计方案评价研究

孟子博¹, 牛占文¹, 刘超超^2,3

1. 天津大学管理与经济学部，天津 300072;
2. 天津商业大学管理学院，天津 300134;
3. 天津商业大学管理创新与评价研究中心，天津 300134

收稿日期:2019-07-13 发布日期:2020-10-30
作者简介:孟子博(1996-)，男，河南省人，硕士研究生，主要研究方向为精益生产

A Research on Evaluation of Lean Design Scheme of Prefabricated Component Factory

MENG Zibo¹, NIU Zhanwen¹, LIU Chaochao^2,3

1. Department of Management and Economics, Tianjin University, Tianjin 300072, China;
2. School of Management, Tianjin University of Commerce, Tianjin 300134, China;
3. Management Innovation and Evaluation Research Center, Tianjin University of Commerce, Tianjin 300134, China

Received:2019-07-13 Published:2020-10-30

摘要/Abstract

摘要： 作为新兴产业，预制构件厂的设计和运营是实现装配式建筑构件高效率、高质量生产和配送的关键前提要素。而精益设计可以帮助预制构件厂从源头消除浪费、提高生产效率，所以对预制构件厂构建精益设计方案并且评价实施后的效果无疑是一个重点问题。针对以上问题，本文从节约资金能力、生产能力、交付能力、持续改进能力等4个视角构建出了预制构件厂精益设计评价指标体系，采用了AHP-DEMATEL法确定了指标的权重，并用改进TOPSIS法得到最终结果，最后以某预制构件厂为例验证了精益设计评价指标体系的合理性和可行性。

关键词: 装配式建造, 预制构件厂, 精益设计, AHP-DEMATEL法, 改进TOPSIS法

Abstract: As an emerging industry, the design and operation of prefabricated component plants is a key prerequisite for achieving high efficiency, high quality production and distribution of fabricated building components. Lean design can help prefabricated component factories eliminate waste and improve production efficiency from the source. Therefore, it is undoubtedly a key issue to build a lean design solution for prefabricated component factories and evaluate the implementation effect. The prefabricated component factory lean design evaluation index system is constructed from the four perspectives of capital, delivery, production and improvement. Then the weight of the index is determined by AHP-DEMATEL method, and the final result is obtained by the improved TOPSIS method. In the end, a prefabricated component factory is used as an example to verify the rationality and feasibility of the lean design evaluation index system.

Key words: industrialization of buildings, prefabricated component factory, lean design, AHP-DEMATEL method, improved TOPSIS method

中图分类号:

C939

孟子博, 牛占文, 刘超超. 预制构件厂精益设计方案评价研究[J]. 工业工程, 2020, 23(5): 140-148.

MENG Zibo, NIU Zhanwen, LIU Chaochao. A Research on Evaluation of Lean Design Scheme of Prefabricated Component Factory[J]. Industrial Engineering Journal, 2020, 23(5): 140-148.

参考文献

[1] 吴红娟, 刘贵文, 毛超. 工业化建造的政策路径研究——基于政府角色分析[J]. 建筑经济, 2016, 37(8): 24-28
WU Hongjuan, LIU Guiwen, MAO Chao. Research on the Policy path of industrialized construction:based on of government roles analysis[J]. Construction Economy, 2016, 37(8): 24-28
[2] ARASHPOUR M, WAKEFIELD R, ABBASI B. Off-site construction optimization: Sequencing multiple job classes with time constraints[J]. Automation in Construction, 2016, 7(1): 262-270
[3] 袁琳, 董娜. 中国建筑工业化发展现状分析与研究[J]. 四川建筑, 2017, 37(2): 41-43
[4] 王永升, 齐二石. 从精益生产到精益设计[J]. 现代管理科学, 2010(3): 6-7
[5] SUNDIN E, BJÃ?RKMAN M, EKLUND M. Improving the layout of recycling centres by use of lean production principles[J]. Waste Management, 2011, 31(6): 1121-1132
[6] WEBER A. Lean plant layout[J]. Assembly, 2012, 28(6): 112-123
[7] LOW S P, GAO S,TIONG K L. Applying lean production principles to facilities design of ramp-up factories[J]. Facilities, 2015, 33(5/6): 280-301
[8] SEYEDHOSSEINI S M, TALEGHANI A E, BAKHSHA A, et al. Extracting leanness criteria by employing the concept of Balanced Scorecard[J]. Expert Systems with Applications, 2011, 38(8): 10454-10461
[9] VINODH S, VIMAL K E K. Thirty criteria based leanness assessment using fuzzy logic approach[J]. The International Journal of Advanced Manufacturing Technology, 2012, 60(9-12): 1185-1195
[10] DENNIS P. Lean production simplified: a plain language guide to the world’s most powerful production system[J]. Journal of Manufacturing Systems, 2002, 21(4): 325
[11] SLACK R A. The lean value principle in military aerospace product development[J]. The Lean Aerospace Initiative. Report Series, 1999, 16(1): 99
[12] ELNADI M, SHEHAB E. A Conceptual Model for Evaluating Product-service Systems Leanness in UK Manufacturing Companies [J]. Procedia Cirp, 2014, 22(1): 281-286
[13] PAPADOPOULOU T C, ÖZBAYRAK M. Leanness: experiences from the journey to date[J]. Journal of Manufacturing Technology Management, 2005, 16(7): 784-807
[14] VINODH S, CHINTHA S K. Leanness assessment using multi-grade fuzzy approach[J]. International Journal of Production Research, 2011, 49(2): 431-445
[15] TEKEZ E K, TAŞDEVIREN G. A model to assess leanness capability of enterprises[J]. Procedia Computer Science, 2016, 100(1): 776-781
[16] 宝斯琴塔娜, 齐二石. 制造系统精益设计的绩效评价体系构建[J]. 统计与决策, 2018(10): 174-177
BAO Siqintana, QI Ershi. Construction of performance evaluation system of manufacturing system lean design[J]. Statistics and Decision, 2018(10): 174-177
[17] 杨承涛, 马训鸣. 制造系统柔性的评价方法[J]. 工程建设与设计, 1996(2): 34-36
[18] 徐金杰, 武忠. 基于AHP和DEMATEL法的技术创新网络知识转移研究——以江苏省风电产业技术创新联盟为例[J]. 情报杂志, 2012, 31(9): 121-125
XU Jinjie, WU Zhong. Knowledge transfer in technology innovation network based on AHP and DEMATEL method[J]. Journal of Intelligence, 2012, 31(9): 121-125
[19] HWANG Chinglai, YOON Kwangsun. Multiple attribute decision making[M].Berlin:Springer Berlin Heidelberg, 1981.
[20] MAESSCHALCK R D, JOUAN-RIMBAUD D, MASSART D L. The Mahalanobis distance[J]. Chemometrics & Intelligent Laboratory Systems, 2000, 50(1): 1-18
[21] 关宏艳, 李宗坤, 葛巍. 基于加权广义马氏距离的TOPSIS方法在水库防洪调度决策中的应用[J]. 天津大学学报(自然科学与工程技术版), 2016, 49(12): 1276-1281
GUAN Hongyan, LI Zongkun, GE Wei. TOPSIS method based on weighted generalized Mahalanobis distance: An application to reservoir flood control operation[J]. Journal of Tianjin University( Science and Technology ), 2016, 49(12): 1276-1281

预制构件厂精益设计方案评价研究

A Research on Evaluation of Lean Design Scheme of Prefabricated Component Factory

RichHTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

本文评价

[1]	蔡东, 胡七丹, 郭春香. 碳交易下供应链中的技术创新激励合约设计[J]. 工业工程, 2019, 22(5): 133-140.
[2]	刘素霞, 徐建飞. 基于前景理论的企业安全投入决策研究[J]. 工业工程, 2017, 20(5): 45-50.
[3]	魏庆琦, 陈金迪. 基于NSGA-Ⅱ算法的分区拣选优化[J]. 工业工程, 2020, 23(3): 1-9.
[4]	钱吴永, 王文香. 基于拣货员协同合作的订单拣选策略研究[J]. 工业工程, 2021, 24(3): 54-59.