基于动态价值流的层流手术中心流程优化研究

doi:10.3969/j.issn.1007-7375.2022.02.017

工业工程 ›› 2022, Vol. 25 ›› Issue (2): 137-145.doi: 10.3969/j.issn.1007-7375.2022.02.017

基于动态价值流的层流手术中心流程优化研究

黄丽^1,2, 叶春明¹, 刘文值³, 罗群³, 董学文⁴, 曹琬琳⁴

1. 上海理工大学管理学院，上海 200093;
2. 攀枝花学院经济与管理学院，四川攀枝花 617000;
3. 攀枝花学院附属医院，四川攀枝花 617000;
4. 攀枝花学院智能制造学院，四川攀枝花，617000

收稿日期:2020-07-07 发布日期:2022-04-28
作者简介:黄丽 (1980—)，女，四川省人，博士研究生，主要研究方向为人工智能与医疗调度
基金资助:
国家自然科学基金资助项目 (71840003)；上海理工大学科技发展资助项目 (2018KJFZ043)；攀枝花学院博士科研资助项目 (2020DOC0011)

Process Optimization of Clean Operation Center Based on Dynamic Value Flow

HUANG Li^1,2, YE Chunming¹, LIU Wenzhi³, LUO Qun³, DONG Xuewen⁴, CAO Wanlin⁴

1. Business School, University of Shanghai for Science and Technology, Shanghai 200093, China;
2. Economics and Management School, Panzhihua University, Panzhihua 617000, China;
3. Affiliated Hospital, Panzhihua University, Panzhihua 617000, China;
4. School of Intelligent Manufacturing, Panzhihua University, Panzhihua 617000, China

Received:2020-07-07 Published:2022-04-28

摘要/Abstract

摘要： 针对层流手术中心超时运行时间长、能耗大等问题，运用基于三角模糊数理论的动态价值流对持续时间不确定的手术流程进行分析，发现瓶颈资源的占用及其波动时长的缩短是问题解决的关键，从而重构手术流程。为评估改善前后的流程绩效，运用蒙特卡洛法生成基于调研数据的仿真数据，使用Matlab软件模拟分析改善前后的手术流程，并用甘特图可视化瓶颈资源的改善效果。研究结论对层流手术中心流程优化具有理论指导意义和应用参考价值。

关键词: 三角模糊数, 动态价值流, 蒙特卡洛仿真, 层流手术中心, 流程优化, 节能

Abstract: In order to solve the problems of long overtime running time, high energy consumption in clean operation center, the dynamic value flow based on triangular fuzzy number theory is employed to analyze the operation process with uncertain duration. It is found that the key to solve the problem is to shorten the timespan and fluctuation range of bottleneck resources, so as to reconstruct the operation process. In order to evaluate the process performance before and after improvement, a Monte Carlo method is used to generate the simulation data based on the survey data, a Matlab software used to simulate and analyze the operation process, and a Gantt chart used to visualize the improvement effect of bottleneck resources. The research conclusions have theoretical significance and application reference value for the process optimization of clean operation center.

Key words: triangular fuzzy number, dynamic value flow, Monte Carlo simulation, laminar flow operation center, process optimization, energy-saving

中图分类号:

C939

黄丽, 叶春明, 刘文值, 罗群, 董学文, 曹琬琳. 基于动态价值流的层流手术中心流程优化研究[J]. 工业工程, 2022, 25(2): 137-145.

HUANG Li, YE Chunming, LIU Wenzhi, LUO Qun, DONG Xuewen, CAO Wanlin. Process Optimization of Clean Operation Center Based on Dynamic Value Flow[J]. Industrial Engineering Journal, 2022, 25(2): 137-145.

参考文献

[1] 罗利, 石应康. 医疗服务资源调度优化理论、方法及应用[M]. 北京: 科学出版社, 2014.
[2] 刘玉英, 杨明莹, 林珂, 等. 医院手术间使用率现状及其影响因素研究[J]. 中国护理管理, 2014, 14(10): 1051-1054
LIU Yuying, YANG Mingying, LIN Ke, et al. Investigation about effective utilization of clean operating rooms at hospitals[J]. Chinese Nursing Management, 2014, 14(10): 1051-1054
[3] 王运平. 中国不同地区层流手术室空调系统节能性研究[D]. 天津: 天津大学, 2012.
WANG Yunping. The energy-saving study on air conditioning system of operating room in different regions of China[D]. Tianjin: Tianjin University, 2012.
[4] JONNY J N. Quality service analysis and improvement of pharmacy unit of xyz hospital using value stream analysis methodology[J]. Materials Science and Engineering, 2013, 12(22): 1-9
[5] 关兵, 许海文, JUAN Amador, 等. 精益医疗管理在手术室运营中的应用[J]. 解放军医院管理杂志, 2014, 21(11): 1073-1076
GUAN Bing, XU Haiwen, JUAN Amador, et al. Application of refined medical care management in operation room process[J]. Hospital Administration Journal of Chinese People's Liberation Army, 2014, 21(11): 1073-1076
[6] 李跃宇. 医院放射科病人就诊精益价值流研究[J]. 工业工程, 2014, 17(6): 7-11
LI Yueyu. A research for patient's treatment lean values stream of radiology department[J]. Industrial Engineering Journal, 2014, 17(6): 7-11
[7] 程博宇, 江志斌, 耿娜, 等. 面向精益医院管理的价值流分析方法[J]. 工业工程与管理, 2018, 23(2): 53-67
CHENG Boyu, JIANG Zhibin, GENG Na, et al. Value stream analysis method based on lean hospital management[J]. Industrial Engineering and Management, 2018, 23(2): 53-67
[8] Mark G. 精益医院: 世界最佳医院管理实践[M]. 2版. 北京: 机械工业出版社, 2013.
[9] BRAGLIA M, FROSOLINI M, ZAMMORI F. Uncertainty in value stream mapping analysis[J]. Taylor journal, 2009, 12(6): 435-453
[10] XIE Y K, PENG Q J. Integration of value stream mapping and agent-based modeling for or improvement[J]. Business Process Management Journal, 2012, 18(4): 585-599
[11] NURI O D, OSMAN U. Lean production in healthcare: a simulation-based value stream mapping and rehabilitation department of a public hospital[J]. Total Quality Management, 2014, 27(1-2): 1-17
[12] 潘欲成. 基于模糊价值流图析技术的企业生产线精益化研究[D]. 沈阳大学, 2014.
PAN Yucheng. The lean study of enterprise production line based on fuzzy value stream mapping technology[D]. Shenyang: Shenyang university, 2014.
[13] 刘洪伟, 张天奕, 许丹. 多科室择期手术日排程与医生指派研究[J]. 工业工程与管理, 2016, 21(6): 10-16
LIU Hongwei, ZHANG Tianyi, XU Dan. Daily scheduling of elective surgery of multi-specialty and doctor assignment problem[J]. Industrial Engineering and Management, 2016, 21(6): 10-16
[14] 刘帅, 高兴, 张金徽. 大连某医院空调系统能耗分析与节能改造[J]. 制冷, 2019, 1(38): 70-74
LIU Shuai, GAO Xing, ZHANG Jinhui. Energy consumption analysis and energy saving reform of air conditioning system in a hospital in Dalian[J]. Referigeration, 2019, 1(38): 70-74
[15] DENTON B, VIAIANO J. Optimization of surgery sequencing and scheduling decisions under uncertainty[J]. Health Care Management Science, 2007, 10: 13-24

基于动态价值流的层流手术中心流程优化研究

Process Optimization of Clean Operation Center Based on Dynamic Value Flow

RichHTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 11

编辑推荐

Metrics

本文评价

[1]	董海, 吴瑶. 基于PIWOA的绿色闭环供应链网络多目标模糊优化设计[J]. 工业工程, 2021, 24(4): 27-35.
[2]	戴敏, 张玉伟, 曾励. 考虑运输时间的绿色作业车间调度问题研究[J]. 工业工程, 2020, 23(2): 41-48.
[3]	罗薇, 符卓, 董伟. 需求受相关性影响的设备备件库存优化[J]. 工业工程, 2019, 22(2): 57-66.
[4]	吴萌, 刘冉, 江志斌, 王雪峰. 不确定性周期性家庭护理资源调度[J]. 工业工程, 2017, 20(1): 51-58.
[5]	张志清1,2，凡艳1，程庆章1. 医药物流中心人工拣选作业流程优化及仿真[J]. 工业工程, 2015, 18(6): 26-31.
[6]	陈震1，徐丽萍2. 碳政策下货运企业运营成本比较分析[J]. 工业工程, 2015, 18(3): 55-62.
[7]	郑辉，刘磊. 基于生命周期和模块化相结合的液压缸节能设计[J]. 工业工程, 2015, 18(1): 11-16.
[8]	杨建华1，张书文1,2. 基于IDEF建模的节能降耗目标管理[J]. 工业工程, 2011, 14(6): 104-107.
[9]	乐泓，陈俊. IE技术在货代业务流程优化中的应用[J]. 工业工程, 2011, 14(5): 116-120.
[10]	侯琳娜1,2, 王海燕3, 贾伟伟2. 液晶显示器外壳生产线平衡分析与改善[J]. 工业工程, 2011, 14(4): 124-128.
[11]	周平1, 孙文婷1, 任志平2. IE理论在营业厅固网业务流程优化中的应用[J]. 工业工程, 2011, 14(2): 109-111.