工业工程

工业工程 ›› 2011, Vol. 14 ›› Issue (3): 106-109.

• 实践与应用 • 上一篇    下一篇

基于SLP的钢铁厂总体布局设计

  

  1. 华东交通大学 机电工程学院，江西 南昌 330013
  • 出版日期:2011-06-30 发布日期:2011-07-08
  • 作者简介:周尔民（1962-），男，江西省人，教授，主要研究方向为虚拟制造，先进制造系统.

Global Layout Design for Iron and Steel Plants Based on SLP

  1. School of Mechanical and Electrical Engineering, East China Jiaotong University, Nanchang 330013,China
  • Online:2011-06-30 Published:2011-07-08

摘要： 以钢铁厂总生产工艺流程为基础，按主要作业单元的总体设计要求，对钢铁厂主要作业场地的总体布置关系予以确定。依据生产车间、辅助车间、动力车间、交通运输设施、职能部门、附属生产和生活服务等部门之间的内外关联、物料进出状况，进行系统优化布置设计。再由各个作业单位的面积大小、位置关系，适当参考其他限制条件和常识惯例，做出钢铁厂总体布局设计，达到布局科学、节约资源、产能提升的效果。 

关键词: 系统布置设计(SLP), 钢铁厂, 总体布局优化

Abstract:  In this paper, layout design is addressed for iron and steel plant such that the general design requirements can be satisfied by using systematic layout planning (SLP) method. According to the production process for the entire plant, the material flow relation is determined among the main facilities including the production workshops, auxiliary plants, power plants, transportation fields, the administrative departments, and subsidiary production and living services departments. With these data, aggregate layout design is obtained. Then, detailed layout is designed based on the space required for each facility. It shows that the design obtained can save space, reduce production cost, and increase productivity.

Key words: systematic layout planning (SLP), iron and steel plant, global layout optimization