社会化产品开发众包设计任务间加权网络建模与模块划分

doi:10.3969/j.issn.1007-7375.2021.05.012

工业工程 ›› 2021, Vol. 24 ›› Issue (5): 95-100.doi: 10.3969/j.issn.1007-7375.2021.05.012

社会化产品开发众包设计任务间加权网络建模与模块划分

刘电霆¹, 胡浩平², 吴丹玲¹

1. 桂林理工大学机械与控制工程学院，广西桂林 541004;
2. 深圳信息职业技术学院财经学院，广东深圳 518172

收稿日期:2020-03-30 发布日期:2021-11-02
通讯作者: 胡浩平(1981—)，男，湖南省人，讲师，硕士，主要研究方向为智能计算、制造业信息化。E-mail：504243373@qq.com E-mail:504243373@qq.com
作者简介:刘电霆(1966—)，男，江西省人，教授，博士，主要研究方向为网络 + 数据驱动设计制造、系统建模与测控
基金资助:
国家自然科学基金资助项目(71961005)；广西自然科学基金资助项目(2020GXNSFAA297024)

Weighted Network Modeling and Module Partitioning Among Crowdsourcing Design Tasks for Social Product Development

LIU Dianting¹, HU Haoping², WU Danling¹

1. College of Mechanical and Control Engineering, Guilin University of Technology, Guilin 541004, China;
2. College of Finance and Economics, Shenzhen Institute of Information Technology, Shenzhen 518172, China

Received:2020-03-30 Published:2021-11-02

摘要/Abstract

摘要： 依据社会化产品开发众包设计任务模块划分的需要，针对产品原子设计任务之间关联的含糊性，采用11级标度加权网络来描述它们的关系并进行剪枝的原理与方法。以模块内聚合度最大、模块间耦合度最小、协作设计难度最低为目标函数，建立产品社会化设计众包任务模块划分的优化模型，采用蚁群算法进行求解；论述原子设计任务之间在功能和结构上信息交流相关度、承包方协作难度的计算方法，给出众包任务模块划分的原则、步骤，并举实例说明所提出方法的可行性。

关键词: 众包设计, 任务模块划分, 加权图, 社会化产品开发, 蚁群算法, 信息交流

Abstract: According to the needs of module division for crowdsourcing design tasks under social product development and aiming at the ambiguity of the correlation among product atomic design tasks, the elementary theory and methods that an 11-level scale weighted networks was used to describe their relationships, and then the weighted network was pruned. An optimization model of module division of crowdsourcing tasks under social design was established with the objective function of maximizing the degree of aggregation within the module, and minimizing the coupling degree between modules, and minimizing the difficulty of collaborative design, and an ant colony algorithm was used to solve it. The calculation methods of relevance of functional and structural information exchange among atomic design tasks and of the difficulty of contractor cooperation were discussed. The principles and steps of crowdsourcing task module division were given. Examples were given to illustrate the feasibility of the proposed method.

Key words: crowdsourcing design, task module division, weighted graph, social product development, ant colony algorithm, information exchange

中图分类号:

刘电霆, 胡浩平, 吴丹玲. 社会化产品开发众包设计任务间加权网络建模与模块划分[J]. 工业工程, 2021, 24(5): 95-100.

LIU Dianting, HU Haoping, WU Danling. Weighted Network Modeling and Module Partitioning Among Crowdsourcing Design Tasks for Social Product Development[J]. Industrial Engineering Journal, 2021, 24(5): 95-100.

参考文献

[1] PETERSON A, SCHAEFER D. Social product development: introduction, overview, and current status[M]//SCHAEFER D. Product development in the socio-sphere. Switzerland: Springer, 2014: 1-33.
[2] SCHAEFER D. Industrial game changers for the socio-sphere[R/OL]. (2012-01). https://researchportal.bath.ac.uk/en/publications/industrial-game-changers-for-the-socio-sphere.
[3] 张富强, 江平宇, 郭威. 服务型制造学术研究与工业应用综述[J]. 中国机械工程, 2018, 29(18): 2144-2163
ZHANG Fuqiang, JIANG Pingyu, GUO Wei. Academic research and industrial application of service-oriented manufacturing[J]. China Mechanical Engineering, 2018, 29(18): 2144-2163
[4] 严杰, 刘人境, 刘晗. 国内外众包研究综述[J]. 中国科技论坛, 2017, 21(8): 59-68
YAN Jie, LIU Renjing, LIU Han. A literature review of domestic and foreign crowdsourcing research[J]. Forum on Science and Technology in China, 2017, 21(8): 59-68
[5] 李刚炎, 肖佩, 杨明忠. 机械设计分解方法的研究及其应用[J]. 武汉汽车工业大学学报, 1997, 19(4): 27-30
LI Gangyan, XIAO Pei, YANG Mingzhong. Study of decomposition methods in mechanical design and application[J]. Journal of Wuhan Automotive Polytechnic University, 1997, 19(4): 27-30
[6] 李靓, 武健伟, 石浩然. 基于DSM的耦合模块划分方法的研究[J]. 机械设计与制造, 2008, 46(8): 223-225
LI Jing, WU Jianwei, SHI Haoran. Research on the improved dsm arthmetic for coupling task order programming[J]. Machinery Design & Manufacture, 2008, 46(8): 223-225
[7] 刘电霆, 周德俭. 基于区间数设计结构矩阵的任务分解与重组[J]. 机械设计与研究, 2009, 25(6): 7-9
LIU Dianting, ZHOU Dejian. Task decomposition & recombination design structure matrix based on interval number[J]. Machine Design and Research, 2009, 25(6): 7-9
[8] 涂建伟, 李彦, 李文强, 等. 基于FDSM的产品族设计模块化方法的研究[J]. 组合机床与自动化加工技术, 2011, 53(8): 16-20
TU Jianwei, LI Yan, LI Wenqiang, et al. Method for product family modular design based on fuzzy design structure matrix[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2011, 53(8): 16-20
[9] DUIN H, ESCHENBACHER J, THOBEN K D. Modeling dynamics in collaboration: an extension to the collaborative network relationship analysis[C]// Proceedings of 12th IFIP WG 5.5 Working Conference on Virtual Enterprises. Brazil: São Paulo, 2011: 287-294.
[10] 胡从林, 容芷君, 陈奎生, 等. 产品设计任务的聚类优化研究[J]. 机械设计与制造, 2014, 52(7): 259-261
HU Conglin, RONG Zhijun, CHEN Kuisheng, et al. Research on clustering optimization of product design task[J]. Machinery Design & Manufacture, 2014, 52(7): 259-261
[11] 陈健, 莫蓉, 初建杰, 等. 工业设计云服务平台协同任务模块化重组与分配方法[J]. 计算机集成制造系统, 2018, 24(3): 720-930
CHEN Jian, MO Rong, CHU Jianjie, et al. Modular restructuring and distribution method of collaborative task in industrial design cloud platform[J]. Computer Integrated Manufacturing Systems, 2018, 24(3): 720-930
[12] 刘电霆, 胡浩平. 绿色产品模块划分的不确定优化及求解[J]. 科技通报, 2015, 31(11): 143-147
LIU Dianting, HU Haoping. Uncertain optimization and solution of green product module partition[J]. Bulletin of Science and Technology, 2015, 31(11): 143-147
[13] 汪小帆, 李翔, 陈关荣. 复杂网络理论及其应用[M]. 北京: 清华大学出版社, 2006.
[14] 谌炎辉, 周德俭, 袁海英, 等. 复杂产品的最小最大划分模块化方法[J]. 计算机集成制造系统, 2012, 18(1): 9-14
CHEN Yanhui, ZHOU Dejian, YUAN Haiying, et al. Min-max partition modularity method of complex product[J]. Computer Integrated Manufacturing Systems, 2012, 18(1): 9-14

社会化产品开发众包设计任务间加权网络建模与模块划分

Weighted Network Modeling and Module Partitioning Among Crowdsourcing Design Tasks for Social Product Development

RichHTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 10

编辑推荐

Metrics

本文评价

[1]	闫军, 常乐, 王璐璐, 赵彤. 带时间窗的同时取送货车辆路径问题求解算法[J]. 工业工程, 2021, 24(5): 72-76.
[2]	周晓晔, 马小云, 崔瑶, 王思聪. 单线超市车辆配置与路径问题优化研究[J]. 工业工程, 2020, 23(6): 83-88,116.
[3]	周娜, 舒帆, 金佩卿. 基于混合启发式算法的设备混合布局问题[J]. 工业工程, 2017, 20(1): 77-82.
[4]	陈洪转，庄雪松，李婷，朱明旭. 航空复杂装备协同研制供应商参与模式决策研究[J]. 工业工程, 2016, 19(4): 146-152.
[5]	阮焕1，耿亮1,2，肖人彬1. 基于极值—蚁群算法的电商末端物流弹性配送策略研究[J]. 工业工程, 2016, 19(1): 51-60.
[6]	何利娟1, 李欣2. 基于蚁群算法的资源均衡优化决策及其MATLAB实现[J]. 工业工程, 2015, 18(6): 125-129.
[7]	项薇1, 殷姣1, 陈赛峰2 . 考虑实际护士排班约束的手术排程优化[J]. 工业工程, 2013, 16(5): 120-124.
[8]	李英俊，陈志祥. 基于改进蚁群算法的一类运输能力约束的生产-运输批量问题求解[J]. 工业工程, 2012, 15(6): 119-125.
[9]	屈国强1，2，李俊芳1，侯东亮1，3. 蚁群系统结合指派规则求解HFS调度问题[J]. 工业工程, 2012, 15(3): 62-68.
[10]	张毕西，张万里，宋静. 基于蚁群算法的中小手工制造企业人员调度 [J]. 工业工程, 2011, 14(4): 119-123.