工业园区中ATO订单拉动的“生产-物流”联动优化方法

doi:10.3969/j.issn.1007-7375.e17-2023

工业工程 ›› 2017, Vol. 20 ›› Issue (4): 37-48.doi: 10.3969/j.issn.1007-7375.e17-2023

工业园区中ATO订单拉动的“生产-物流”联动优化方法

吴强¹, 屈挺^1,2, 颜志军¹, 张婷¹, 黄国全³

1. 广东工业大学广东省计算机集成制造重点实验室, 广东广州 510006;
2. 暨南大学电气信息学院, 广东珠海 519070;
3. 香港大学工业及制造系统工程系, 中国香港

收稿日期:2017-02-15 出版日期:2017-08-30 发布日期:2017-09-08
作者简介:吴强(1990-),男,湖北省人,硕士研究生,主要研究方向为制造物联网、生产物流管理
基金资助:
国家自然科学基金资助项目（51475095）；广州市科学（技术）研究专项一般项目资助（201607010154）

Production Logistics Synchronization Optimization Through ATO Pulling in Industrial Park

WU Qiang¹, QU Ting^1,2, YAN Zhijun¹, ZHANG Ting¹, HUANG Guoquan³

1. Guangdong CIMS Provincial Key Lab, Guangdong University of Technology, Guangzhou 510006, China;
2. College of Electrical and Informatics, Jinan University, Zhuhai 519070, China;
3. Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong, Hong Kong, China

Received:2017-02-15 Online:2017-08-30 Published:2017-09-08

摘要/Abstract

摘要： 为解决工业园区中由按订单装配（assembly to order， ATO）型订单产生的生产物流信息不同步、运营成本高等问题，提出物联网环境下的三层两级联动控制机制，采用协同优化算法建模仿真分析，结果表明：1）订单动态性发生得越早，联动控制效益越明显；2）工业园区中多企业间的联动控制可有效降低物流运输成本；3）动态性发生得越晚且订单需求量级越大，联动控制越困难，但相对于不联动而言，其经济效益较好。

关键词: 生产物流, 联动控制, 协同优化

Abstract: To address problems induced by the assembly to order (ATO) production in industrial park, e.g. production logistics information synchronization and high operation cost, the "three-stage two-degree" production logistics synchronization (PLS) control mechanism was proposed based on Internet of Thing. Using simulation analysis of the cooperative optimization algorithm, it showed that 1) the earlier is the order dynamic, the more obvious is the benefit of synchronization control; 2) that the synchronization control across enterprises in industrial park can effectively help reduce logistics costs; and 3) that the later the dynamic happens and the bigger is the demand order, the more difficult the synchronization control will be, but its economic benefits will be better relative to un-synchronization.

Key words: production logistics, synchronization control, collaborative optimization(CO)

中图分类号:

TP301.6

吴强, 屈挺, 颜志军, 张婷, 黄国全. 工业园区中ATO订单拉动的“生产-物流”联动优化方法[J]. 工业工程, 2017, 20(4): 37-48.

WU Qiang, QU Ting, YAN Zhijun, ZHANG Ting, HUANG Guoquan. Production Logistics Synchronization Optimization Through ATO Pulling in Industrial Park[J]. Industrial Engineering Journal , 2017, 20(4): 37-48.

参考文献

[1] 张霞, 鲁德银, 蔡根女. 基于产业集群的工业园区研究的理论综述及其启示[J]. 科技进步与对策, 2005, 22(4): 171-173.ZHANG Xia, LU Deyin, CAI Gennyu. The revelation and summarize of the theory on industry section based on industry cluster [J]. Science & Technology Progress and Policy, 2005, 22(4): 171-173.
[2] QIU X, LUO H, XU G, et al. Physical assets and service sharing for IoT-enabled supply hub in industrial park (SHIP)[J]. International Journal of Production Economics, 2015, 159(2): 4-15.
[3] 房殿军. 面向工业4.0的智能工厂与智能物流系统建设[J]. 物流技术与应用, 2015(6): 90-94.FANG D J. Industry 4.0 oriented intelligent industry and intelligent logistics system construction[J]. Logistics & Material Handling, 2015(6): 90-94.
[4] 张映锋, 赵曦滨, 孙树栋, 等. 一种基于物联技术的制造执行系统实现方法与关键技术[J]. 计算机集成制造系统, 2012, 18(12): 2634-2642.ZHANG Yingfeng, ZHAO Xibin, SUN Shudong, et al. Implementing method and key technologies for IoT-based manufacturing execution system[J]. Computer Integrated Manufacturing Systems, 2012, 18(12): 2634-2642.
[5] 程翱, 屈挺, 王宗忠, 等. 基于排队论的生产物流运输资源优化配置方法[J]. 广东工业大学学报, 2015, 32(4): 83-87, 119.CHENG Ao, QU Ting, WANG Zongzhong, et al. Optimal configuration of transportation resources based on queuing theory in a production logistics system[J]. Journal of Guangdong University of Technology 2015, 32(4): 83-87, 119.
[6] QU T, CHEN Y D, WANG Z Z, et al. Internet-of-things-based just-in-time milk-run logistics routing system[C/OL]. (2015-06-04). http://ieeexplore.ieee.org/document/7116045/.
[7] CHOW H K H, CHOY K L, LEE W B, et al. Design of a RFID case-based resource management system for warehouse operations[J]. Expert Systems with Applications, 2005, 30(4): 561-576.
[8] 于渝飞, 于重重, 潘佳俊. 基于约束理论的零部件供应商协同供货研究[J]. 计算机仿真, 2016, 33(8): 201-204.YU Yufei, YU Chongchong, PAN Jiajun. Research of component suppliers’supply coordination based on theory of constraint[J]. Computer Simulation, 2016, 33(8): 201-204.
[9] 谢世满, 陈福建, 杨子豪, 等. ATO生产模式信息化管理的关键技术分析[J]. 电脑编程技巧与维护, 2016(6): 50-51.XIE Shiman, CHEN Fujian, YANG Zihao, et al. Key technology analysis on ATO production mode information management. [J] Computer Programming Skills and Maintenance, 2016(6): 50-51.
[10] PAPIN C, DENOUEL Y A, LAUGIER D, et al. Digital manufacturing: history, perspectives, and outlook[J]. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 2009, 223(5): 451-462.
[11] BREWER A, SLOAN N, LANDERS T L. Intelligent tracking in manufacturing[J]. Journal of Intelligent Manufacturing, 1999, 10(3): 245-250.
[12] 刘卫宁, 黄文雷, 孙棣华, 等. 基于射频识别的离散制造业制造执行系统设计与实现[J]. 计算机集成制造系统, 2007, 13(10): 1886-1890.LIU Weining, HUANG Wenlei, SUN Dihua, et al. Design and implementation of discrete manufacturing industry MES based on RFID technology [J]. Computer Integrated Manufacturing Systems, 2007, 13(10): 1886-1890.
[13] CHOI S H, YANG B, CHEUNG H H, et al. RFID tag data processing in manufacturing for track-and-trace anti-counterfei- ting[J]. Computers in Industry, 2015, 68: 148-161.
[14] HUANG G Q, WRINGHT P K, NEWMAN S T. Wireless manufacturing: a literature review, recent developments, and case studies[J]. International Journal of Computer Integrated Manufacturing, 2008, 22(22): 579-594.
[15] HUAHG G Q, QU T, FANG M J, et al. RFID-enabled gateway product service system for collaborative manufacturing alliances[J]. CIRP Annals-Manufacturing Technology, 2011, 60(1): 465-468.
[16] KIM J S, LEE H J, OH R D. Smart integrated multiple tracking system development for IOT based target-oriented logistics location and resource service[J]. Journal of Human Hypertension, 2015, 9(5): 195-204.
[17] QU T, LEI S P, WANG Z Z, et al. IoT-based real-time production logistics synchronization system under smart cloud manufacturing[J]. Advanced Manufacturing Technology, 2015, 84(1): 147-126.
[18] ZHONG R Y, LAN S, XU C, et al. Visualization of RFID-enabled shopfloor logistics big data in cloud manufacturing[J]. International Journal of Advanced Manufacturing Technology 2015, 84(1-4): 5-16.
[19] JANG B S, YANG Y S, JUNG H S, et al. Managing approximation models in collaborative optimization[J]. Structural & Multidisciplinary Optimization, 2005, 30(1): 11-26.
[20] GU X, RENAUD J E, ASHE L M, et al. Decision-based collaborative optimization[J]. Journal of Mechanical Design Asme, 2002, 124(1): 1-13.

工业园区中ATO订单拉动的“生产-物流”联动优化方法

Production Logistics Synchronization Optimization Through ATO Pulling in Industrial Park

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

编辑推荐

Metrics

本文评价

[1]	蒋红飞, 屈挺, 张凯, 黄国全. 基于数字孪生的高动态生产系统联动决策方法[J]. 工业工程, 2021, 24(2): 57-67.
[2]	刘轩, 屈挺, 吴强, 张婷, 黄国全. 基于物联网的“生产—物流”动态齐套联动问题分析及其解决方案[J]. 工业工程, 2017, 20(3): 35-44.
[3]	毛健，乔金友，王立军，王英. 基于Witness的汽车零部件生产物流系统仿真研究[J]. 工业工程, 2011, 14(3): 124-127.