考虑设备劣化及返工的质量批量模型研究

doi:10.3969/j.issn.1007-7375.2020.03.008

工业工程 ›› 2020, Vol. 23 ›› Issue (3): 59-64,74.doi: 10.3969/j.issn.1007-7375.2020.03.008

考虑设备劣化及返工的质量批量模型研究

方叶祥, 王洪冬, 钱庆, 樊树海

南京工业大学经济与管理学院，江苏南京 211816

收稿日期:2019-05-23 发布日期:2020-07-04
作者简介:方叶祥(1971-)，男，安徽省人，副教授，博士，主要研究方向为分布式生产计划协调研究
基金资助:
国家自然科学基金资助项目(71671089)；江苏省社会科学基金资助项目(15GLB020)；江苏省高校社会科学重点基金资助项目(2017ZDIXM075)

A Study of the Quality Batch Model Considering Equipment Degradation and Rework

FANG Yexiang, WANG Hongdong, QIAN Qing, FAN Shuhai

School of Economics and Management, Nanjing Tech University, Nanjing 211816, China

Received:2019-05-23 Published:2020-07-04

摘要/Abstract

摘要： 为了得到最大质量批量，研究了返工成本边际效应下的期望利润值计算方法，将生产过程分为两个阶段：无需返工和需要返工的连续加工。给出了质量控制策略下批量计算公式以及考虑边际成本下的最大利润所对应的质量批量。采用蒙特卡洛仿真和Design Expert 8.0.6软件拟合，通过数字实验，对比了返工成本与未考虑返工成本情况下的期望利润值。研究显示，考虑返工成本边际效应下的质量批量大于一般的经济批量，所得到期望利润也最大。

关键词: 生产批量, 返工, 响应曲面法, 期望利润

Abstract: In order to get the maximum quality batch, the calculation method of expected profit value is studied under the marginal effect of rework cost. The production process is divided into two stages in which one is continuous processing without rework and the other is continuous processing requiring rework. The batch calculation formula under the quality control strategy and the quality batch corresponding to the maximum profit under the marginal cost are given. Monte Carlo simulation and Design Expert 8.0.6 software are used to work out the result. The expected profit value of rework cost is compared with that of no rework cost. Through the digital experiment, the research shows that the quality lot size considering the marginal effect of rework cost is larger than the general economic lot size, and the expected profit at maturity is also the largest.

Key words: production batch, rework, response surface method, expected profit

中图分类号:

F273
TP391

方叶祥, 王洪冬, 钱庆, 樊树海. 考虑设备劣化及返工的质量批量模型研究[J]. 工业工程, 2020, 23(3): 59-64,74.

FANG Yexiang, WANG Hongdong, QIAN Qing, FAN Shuhai. A Study of the Quality Batch Model Considering Equipment Degradation and Rework[J]. Industrial Engineering Journal, 2020, 23(3): 59-64,74.

参考文献

[1] GIRI B C, DOHI T. Exact formulation of stochastic EMQ model for an unreliable production system[J]. Journal of the Operational Research Society, 2005, 56(5): 563-575
[2] KIM C H, HONG Y. An optimal production run length in deteriorating production processes[J]. International Journal of Production Economics, 1999, 58: 183-189
[3] CHEN Y C. An optimal production and inspection strategy with preventive maintenance error and rework[J]. Journal of Manufacturing Systems, 2013, 32: 99-106
[4] 卢震, 郭巧顺, 徐健. 基于周期性不完全预防性维修的最优经济生产批量决策[J]. 系统工程理论与实践, 2017, 37(10): 2621-2629
LU Zhen, GUO Qiaoshun, XU Jian. Optimal economic production batch decision based on periodic incomplete preventive maintenance[J]. Computer Integrated Manufacturing Systems, 2017, 37(10): 2621-2629
[5] CHAKRABORTY T, GIRI B, CHAUDHURI K. Production lotsizing with process deterioration and machine breakdown under inspection schedule[J]. Omega, 2009, 37(2): 257-71
[6] TAPIERO C S. Continuous quality production and machine maintenance[J]. Naval Research Logistic, 1986, 33(3): 489-499
[7] RADHOUI M, REZGN, CHELBI A. Integrated maintenance and control policy based on quality control[J]. Computers & Industrial Engineering, 2010, 58(3): 443-51
[8] 邵校, 陈志祥, 伏开放. 考虑产品合格率衰变的设备维修与生产决策[J]. 工业工程与管理, 2017, 22(3): 7-15
SHAO Xiao, CHEN Zhixiang, FU Kaifang. Equipment maintenance and production decision considering product qualification rate decay[J]. Industrial Engineering and Management, 2017, 22(3): 7-15
[9] 冷乔, 王丽亚, 赵世雄, 等. 多机串行系统的生产批量与维护计划集成优化[J]. 计算机集成制造系统, 2016, 22(8): 1945-1952
LENG Qiao, WANG Liya, ZHAO Shixiong, et al. Integration of production batch and maintenance plan for multi-machine serial system[J]. Computer Integrated Manufacturing Systems, 2016, 22(8): 1945-1952
[10] 周炳海, 刘玉旺. 考虑设备劣化及随机需求的最优生产周期模型[J]. 哈尔滨工程大学学报, 2017, 38(6): 950-955
ZHOU Binghai, LIU Yuwang. Optimal production cycle model considering equipment degradation and stochastic demand[J]. Journal of Harbin Engineering University, 2017, 38(6): 950-955
[11] 甘婕, 曾建潮. 考虑劣化状态的单机调度与维修决策集成模型[J]. 控制与决策, 2016, 31(3): 513-520
GAN Jie, ZENG Jianchao. Integrated model for single machine scheduling and maintenance decision considering degraded state[J]. Control and Decision, 2016, 31(3): 513-520
[12] 甘婕, 曾建潮, 张晓红. 考虑性能可靠度约束的维修决策模型[J]. 计算机集成制造系统, 2016, 22(4): 1079-1087
GAN Jie, ZENG Jianchao, ZHANG Xiaohong. Maintenance decision model considering performance reliability constraints[J]. Computer Integrated Manufacturing Systems, 2016, 22(4): 1079-1087
[13] 周炳海, 刘子龙. 考虑质量损失的退化系统维护建模[J]. 浙江大学学报(工学版), 2016, 50(12): 2270-2276
ZHOU Binghai, LIU Zilong. Degraded system maintenance modeling considering mass loss[J]. Journal of Zhejiang University (Engineering Science), 2016, 50(12): 2270-2276
[14] 成国庆, 周炳海, 李玲. 劣化系统的生产、质量控制与视情维护联合建模与优化[J]. 计算机集成制造系统, 2019, 25 (7): 1620-1629.
CHENG Guoqing, ZHOU Binghai, LI Lin. Joint modeling and optimization of production, quality control and condition-based maintenance of degraded systems[J]. Computer Integrated Manufacturing Systems, 2019, 25 (7): 1620-1629.
[15] 李玲, 成国庆, 柳炳祥. 基于Gamma过程的加速劣化系统模型及其最优视情维修策略[J]. 计算机集成制造系统, 2013, 19(11): 2922-2927
LI Lin, CHENG Guoqing, LIU Bingxiang. Accelerated degradation system model based on gamma process and its optimal condition-based maintenance strategy[J]. Computer Integrated Manufacturing Systems, 2013, 19(11): 2922-2927
[16] 刘学娟, 冯志鹏. 基于随机系数增长模型的状态维修与EPQ联合优化[J]. 系统工程理论与实践, 2019, 39(1): 251-258
LIU Xuejuan, FENG Zhipeng. State maintenance and EPQ joint optimization based on random coefficient growth model[J]. Systems Engineering-Theory & Practice, 2019, 39(1): 251-258
[17] 刘学娟, 赵斐, 马晓洋. 多产品生产计划与非周期预防维修整合优化模型[J]. 中国管理科学, 2017, 25(11): 189-196
LIU Xuejuan, ZHAO Fei, MAO Xiaoyang. Multi-product production planning and non-periodic prevention and maintenance integration optimization model[J]. Chinese Journal of Management Science, 2017, 25(11): 189-196

考虑设备劣化及返工的质量批量模型研究

A Study of the Quality Batch Model Considering Equipment Degradation and Rework

RichHTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 9

编辑推荐

Metrics

本文评价

[1]	王小岗, 王小明, 陈庆新, 毛宁. 具有随机返工且可中断的设计任务调度[J]. 工业工程, 2019, 22(5): 59-67.
[2]	赖新峰, 陈志祥. 不完备生产与条件维护策略下的生产批量决策研究[J]. 工业工程, 2019, 22(4): 31-39.
[3]	冯春, 陈艳娜. 双渠道订单农业供应链违约问题研究[J]. 工业工程, 2018, 21(4): 68-74.
[4]	伏开放, 陈志祥. 产出和质检具有学习效应的EPQ决策[J]. 工业工程, 2016, 19(5): 153-158.
[5]	陈洪转，庄雪松，李婷，朱明旭. 航空复杂装备协同研制供应商参与模式决策研究[J]. 工业工程, 2016, 19(4): 146-152.
[6]	许静, 何桢, 陈喆芝, 袁蓉. 基于主成分分析的函数型产品质量特性的优化方法研究[J]. 工业工程, 2016, 19(1): 74-80.
[7]	陈琴1,2, 祁明1. 考虑风险偏好的定价决策与需求信息共享价值分析[J]. 工业工程, 2015, 18(5): 64-73.
[8]	陈建国, 舒辉, 余平祥. 随机返工及重加工情形下的Job-Shop调度问题[J]. 工业工程, 2015, 18(5): 127-133.
[9]	李英俊，陈志祥. 基于改进蚁群算法的一类运输能力约束的生产-运输批量问题求解[J]. 工业工程, 2012, 15(6): 119-125.