基于无穷范数空间距离的计数型函数响应优化方法研究

doi:10.3969/j.issn.1007-7375.2021.06.005

工业工程 ›› 2021, Vol. 24 ›› Issue (6): 34-40.doi: 10.3969/j.issn.1007-7375.2021.06.005

基于无穷范数空间距离的计数型函数响应优化方法研究

王贤鹏, 何桢

天津大学管理与经济学部，天津 300072

收稿日期:2020-05-25 发布日期:2022-01-24
作者简介:王贤鹏(1979—)，男，江西省人，硕士研究生，主要研究方向为质量管理

A Study of the Optimization Method for Count-Type Functional Responses Based on the Infinity-Norm Distance

WANG Xianpeng, HE Zhen

College of Management and Economics, Tianjin University, Tianjin 300072, China

Received:2020-05-25 Published:2022-01-24

摘要/Abstract

摘要： 计数型函数响应在制造过程中广泛存在。然而，已有研究大多针对的是连续型函数响应的优化。本文基于拟合值向量的无穷范数空间距离指标，结合满意度函数法，提出一元和多元计数型函数响应优化方法。仿真试验结果表明，本文提出的拟合值向量无穷范数空间距离指标更精准地反映函数响应向量之间真实距离。该方法应用于某公司液晶显示屏模组柔性电路板与玻璃基板压接工艺参数改进，降低了产品不合格率。

关键词: 计数型函数, 响应优化, 无穷范数空间距离, 满意度函数, 广义线性模型

Abstract: Count-type functional responses widely exist in manufacturing processes. However, most existing researches are focused on the optimization of continuous functional responses. An optimization method is proposed for count-type functional responses by combining the infinity-norm distance index for the vectors of the fitted values with the desirability function method. The simulation results show that the proposed infinity-norm distance index for fitted value vectors reflects the true distance more accurately and less variably. This method is applied to the analysis of the bonding process for flexible printed circuits and glass substrates in a TFT-LCD module manufacturing company. The unqualified rate of products is effectively reduced.

Key words: count-type functional data, response optimization, infinity-norm distance, desirability function, generalized linear model

中图分类号:

F273.2

王贤鹏, 何桢. 基于无穷范数空间距离的计数型函数响应优化方法研究[J]. 工业工程, 2021, 24(6): 34-40.

WANG Xianpeng, HE Zhen. A Study of the Optimization Method for Count-Type Functional Responses Based on the Infinity-Norm Distance[J]. Industrial Engineering Journal, 2021, 24(6): 34-40.

参考文献

[1] NAIR V, TAAM W, YE K. Analysis of functional responses from robust design studies[J]. Journal of Quality Technology, 2002, 34(4): 355-370
[2] CRESSIE N A. Statistics for spatial data[M]. New York: Wiley, 1993.
[3] DEL Castillo E, COLOSIMO B. Statistical shape analysis of experiments for manufacturing processes[J]. Technometrics, 2011, 53(1): 1-15
[4] MILLER A, WU C. Parameter design for signal-response systems: a differnet look at Tanguchi's dynamic parameter design[J]. Statistical Science, 1996, 11(2): 122-136
[5] GOVAERTS B, NOЁL J. Analysing the results of a designed experiment when the response is a curve: methodology and application in metal injection moulding[J]. Quality and Reliablity Engineering International, 2005, 21(5): 509-520
[6] DEL C E, COLOSIMO B, ALSHRAIDEH H. Bayesian modeling and optimization of functional responses affected by noise factors[J]. Journal of Quality Technology, 2012, 44(2): 117-135
[7] GOH T. Management of parametric response in design of experiments[J]. Quality and Reliablity Engineering International, 2014, 30(8): 1191-1195
[8] 许静, 何桢, 陈喆芝, 等. 基于主成分分析的函数型产品质量特性的优化方法研究[J]. 工业工程, 2016, 19(1): 74-80
XU Jing, HE Zhen, CHEN Zhezhi, et al. A study of optimizing functional respopnse problems based on principal component analysis[J]. Industrial Engineering Journal, 2016, 19(1): 74-80
[9] PAN R, SALEH M. On designing experiments for a dynamic response modeled by regression splines[J]. Applied Stochastic Models in Business and Industry, 2020, 36(2): 251-267
[10] FOGLIATTO F S. Multiresponse optimization of products with functional quality characteristics[J]. Quality and Reliability Engineering International, 2008, 24(8): 927-939
[11] BAKHTIARIFAR M H, BASHIRI M, AMIRI A. Optimization of problems with multivariate multiple functional responses: a case study in air quality[J]. Communications in Statistics - Simulation and Computation, 2017, 46(10): 8049-8063
[12] DOBSON Annette J, BARNETT A G. An introduction to generalized linear models[M]. 4th ed. Boca Raton, FL: Taylor & Francis, 2018.
[13] HORN R A, JOHNSON C R. Norms for vectors and matrices[M]// Matrix Analysis. 2nd ed. Cambridge, England: Cambridge University Press, 2012.
[14] HARRINGTON E C. The desirability function[J]. Industrial Quality Control, 1965, 21(10): 494-498
[15] DERRINGER G, SUICH R. Simultaneous optimization of several response variables[J]. Journal of Quality Technology, 1980, 12(4): 214-219

基于无穷范数空间距离的计数型函数响应优化方法研究

A Study of the Optimization Method for Count-Type Functional Responses Based on the Infinity-Norm Distance

RichHTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	张旭涛1,2，何桢2，毕海玲1. 基于似无关模型的改进多元损失函数方法[J]. 工业工程, 2016, 19(6): 51-55.
[2]	许静, 何桢, 陈喆芝, 袁蓉. 基于主成分分析的函数型产品质量特性的优化方法研究[J]. 工业工程, 2016, 19(1): 74-80.