短生命周期产品生产时机与质量选择研究

doi:10.3969/j.issn.1007-7375.2023.06.008

摘要/Abstract

摘要： 因产品质量决策受市场需求影响，延迟生产可以明确市场需求。论文研究需求不确定性与顾客流失率对于短生命周期产品生产时机与质量选择决策的影响。结果表明，顾客流失率小于某一临界值，需求不确定性较小时，企业立即生产标准产品；需求不确定性中等时，企业延迟生产差异产品；需求不确定性较大时，企业延迟生产标准产品。顾客流失率大于另一临界值，需求不确定性较小时，企业立即生产差异产品；需求不确定性中等时，企业延迟生产标准产品；需求不确定性较大时，企业延迟生产差异产品。顾客流失率位于两个临界值之间，企业的决策与两个临界值的相对大小有关。

关键词: 生产时机, 质量选择, 短生命周期, 需求不确定性, 顾客流失率

Abstract: Product quality decisions are influenced by market demand. Postponement production can clarify market demand. This paper studies the influence of demand uncertainty and customer churn rate on the production timing and quality selection decisions of short life cycle products. Results show that: when the customer churn rate is less than a certain threshold, if demand uncertainty is low, the enterprise immediately produces standard products; if demand uncertainty is medium, the enterprise delays the production of differentiation products; if demand uncertainty is high, the enterprise delays the production of standard products. When the customer churn rate is greater than the other threshold, if demand uncertainty is low, the enterprise immediately produces differentiation products; if demand uncertainty is medium, the enterprise delays the production of standard products; if demand uncertainty is high, the enterprise delays the production of differentiation products. When the customer churn rate is between two thresholds, the decision of the enterprise is related to the relative values of the two thresholds.

Key words: production timing, quality selection, short-life-cycle, demand uncertainty, customer churn rate

中图分类号:

C935

燕夏敏. 短生命周期产品生产时机与质量选择研究[J]. 工业工程, 2023, 26(6): 75-82.

YAN Xiamin. Production Timing and Quality Selection of Short Life Cycle Products[J]. Industrial Engineering Journal, 2023, 26(6): 75-82.

参考文献

[1] 程明宝, 王影, 邹美萍, 等. 考虑消费者具有质量和价格偏好的双渠道供应链最优决策[J]. 运筹与管理, 2022, 31(6): 74-81
CHENG Mingbao, WANG Ying, ZOU Meiping, et al. Optimal decision-making of dual-channel supply chain considering consumers' quality and price preferences[J]. Operations Research and Management, 2022, 31(6): 74-81
[2] WANG R, KE C, CUI S. Product price, quality, and service decisions under consumer choice models[J]. Manufacturing & Service Operations Management, 2022, 24(1): 430-447
[3] TIWARI S, CÁRDENAS-BARRÓN L E, MALIK A I, et al. Retailer's credit and inventory decisions for imperfect quality and deteriorating items under two-level trade credit[J]. Computers & Operations Research, 2022, 138: 105617
[4] TIJSKENS L, SCHOUTEN R. Modeling quality attributes and quality related product-properties[M/OL]//Postharvest Handling. 4th Edition. 2022: 99-133. https://doi.org/10.1016/B978-0-12-822845-6.00004-X.
[5] 胡雨菲, 陈良华. 产品质量差异与需求不确定双因素下的双渠道供应链分销策略选择[J]. 河海大学学报 (哲学社会科学版) , 2022, 24(5): 85-94
HU Yufei, CHEN Lianghua. Distribution strategy selection of dual-channel supply chain based on product quality difference and demand uncertainty[J]. Journal of Hohai University (Philosophy and Social Sciences) , 2022, 24(5): 85-94
[6] GHARAEI A, KARIMI M, SHEKARABI S. An integrated multi-product, multi-buyer supply chain under penalty, green, and quality control polices and a vendor managed inventory with consignment stock agreement: the outer approximation with equality relaxation and augmented penalty algorithm[J]. Applied Mathematical Modelling, 2019, 69: 223-254
[7] MANOVA K, YU Z. Multi-product firms and product quality[J]. Journal of International Economics, 2017, 109: 116-137
[8] SCHUBERT S. The low-quality advantage in vertical product differentiation[J]. Managerial and Decision Economics, 2017, 38(7): 923-928
[9] FAROOQ M A, KIRCHAIN R, NOVOA H, et al. Cost of quality: evaluating cost-quality trade-offs for inspection strategies of manufacturing processes[J]. International Journal of Production Economics, 2017, 188: 156-166
[10] 刘霖, 刘韧. 多企业纵向差异化竞争的博弈分析——局部纳什均衡与全局纳什均衡[J]. 中央财经大学学报, 2022, 422(10): 85-93
LIU Lin, LIU Ren. Game analysis of vertical differentiation competition among multi-firms: local Nash equilibrium and global Nash equilibrium[J]. Journal of Central University of Finance and Economics, 2022, 422(10): 85-93
[11] HOEK R, PEELEN E, COMMANDEUR H R. Achieving mass customization through postponement: a study of international changes[J]. Journal of Market-Focused Management, 1999, 3(3): 353-368
[12] PEDRAM M, BALACHANDER S. Increasing quality sequence: when is it an optimal product introduction strategy?[J]. Management Science, 2014, 61(10): 2487-2494
[13] ZHANG L, WANG J. Coordination of the traditional and the online channels for a short-life-cycle product[J]. European Journal of Operational Research, 2017, 258(2): 639-651
[14] 黄雨龙, 沈婷, 袁泉. 基于产品生命周期的战略库存与动态定价决策研究[J]. 管理工程学报, 2023, 3(37): 22-27
HUANG Yulong, SHEN Ting, YUAN Quan. Research on strategic inventory and dynamic pricing decision based on product life cycle[J]. Journal of Industrial Engineering and Engineering Management, 2023, 3(37): 22-27
[15] 陈瑶. 基于“短生命周期产品”视域下的美特斯邦威存货管理问题研究[D]. 长春: 吉林财经大学, 2022.
CHEN Yao. Research on inventory management of Metersbonwe from the perspective of "short life cycle products"[D]. Changchun: JiLin University of Finance and Economics, 2022.
[16] 郭传好, 陈芳, 单而芳. 短生命周期乳制品供应链网络成本与收益优化研究[J]. 中国管理科学, 2017, 25(2): 87-97
GUO Chuanhao, CHEN Fang, SHAN Erfang. Study on cost and benefit optimization of short life cycle dairy supply chain network[J]. Chinese Journal of Management Science, 2017, 25(2): 87-97
[17] 李杰, 陈家宁. 面向移动终端销售预测的短生命周期建模方法[J]. 中国管理科学, 2016, 24(S1): 779-784
LI Jie, CHEN Jianing. Short life cycle modeling method for mobile terminal sales forecasting[J]. China Management Science, 2016, 24(S1): 779-784
[18] ZHANG W, HE Y. Optimal policies for new and green remanufactured short-life-cycle products considering consumer behavior[J]. Journal of Cleaner Production, 2019, 214: 483-505
[19] SUN Y, CAI H H, SU R, et al. Advantage of low quality in short life cycle products[J]. Asia Pacific Journal of Marketing and Logistics, 2019, 32(5): 1038-1054
[20] BISH E K, CHEN W. The optimal resource portfolio under consumer choice and demand risk for vertically differentiated products[J]. Journal of the Operational Research Society, 2016, 67(1): 87-97