工业工程

工业工程 ›› 2012, Vol. 15 ›› Issue (2): 115-120.

• 实践与应用 • 上一篇    下一篇

基于启发式算法的电控板装配线线平衡优化

  

  1. 华南农业大学 信息学院，广东 广州 510642
  • 出版日期:2012-04-30 发布日期:2012-05-17
  • 作者简介:陈建国(1963-)，男，湖南省人，教授，博士，主要研究方向为企业管控一体化与信息化.
  • 基金资助:

    广东省教育部产学研结合项目（2011B090400160）；华南农业大学校长基金资助项目（5600 K08171）

A Heuristic for the Balancing of Electric Control Board Assembly Line

  1. College of Informatics, South China Agricultural University, Guangzhou 510642, China
  • Online:2012-04-30 Published:2012-05-17

摘要： 为了解决人员配置不稳定而导致的工位作业负荷不平衡问题，以某电控板装配企业为对象，构建其电控板装配线生产模型和线平衡优化模型。在该优化模型中，将约束条件转化为启发式规则，改进模型的参数设置和处理过程，将该模型转化为可求解的启发式算法。以该企业某电控装配线为例，通过线平衡优化实验证明该模型有效提高产量和线平衡率，说明该模型是有效和实用的。

关键词: 生产线, 启发式算法, 装配流水线

Abstract: Often, because of inappropriate work design, an assembly is unbalanced. As a case problem, a study is conducted to balance an electric control board assembly line in a plant. After an investigation for the line, the line balancing problem is formulated as an optimization model. Then, by analyzing the model, the constraints in the model are transferred into a set of rules. Based on these rules, a heuristic is developed to solve the problem. Consequently, the line balancing is significantly improved and the productivity is increased.

Key words: line balancing, heuristic, assembly line