模块化生产在复杂系统制造过程的运用研究

doi:10.3969/j.issn.1007-7375.2018.04.005

摘要/Abstract

摘要： 基于复杂系统制造过程对完善生产资料准备、缩短制造周期、增强生产计划控制力、提升高端制造业发展水平的迫切要求，根据模块化理论、制造工艺、项目管理、最优化理论等方法，构建复杂系统制造模块顺序网络图，并建立求解制造周期的整数规划模型，最后举出实例，运用优化求解软件CPLEX得出整个系统制造周期及对应的关键制造路径，运用求解结果制定生产资料准备计划及生产计划，发现模块化技术实行后，生产计划及生产资料准备计划实现最大并行化开展，且生产资料准备先于生产计划开展前完成，整个系统制造周期大大缩短，验证了模型的有效性、准确性和优越性。

关键词: 复杂系统制造, 模块化生产, 整数规划, 生产计划, 制造周期

Abstract: Based on the strong urges for improving production preparation process, shortening production cycle, enhancing production planning and control ability and promoting development level of high-end manufacturing industry, network diagrams to describe manufacturing process sequence of modules in complex system were drawn. Methods of modularity theory, manufacturing techniques, project management and optimization theory were considered. Integer programming model to determine production cycle was built. A case study was provided then. Production cycle of the entire manufacturing system and corresponding critical manufacturing path were obtained by using optimization solution software CPLEX. The solving results were used to make production preparation plan and build production plan. After adopting modular techniques, production plan and production preparation plan can go on according to the principle of maximum parallelism and production preparation can be finished before production plan begins. Production cycle is greatly shortened. The effectiveness, accuracy and superiority of the model were validated.

Key words: complex system manufacturing, modular production, integer programming, production planning, production cycle

中图分类号:

米雷雨. 模块化生产在复杂系统制造过程的运用研究[J]. 工业工程, 2018, 21(4): 34-42.

MI Leiyu. An Application Research of Modular Production in Complex System Manufacturing Process[J]. Industrial Engineering Journal , 2018, 21(4): 34-42.

参考文献

[1] 成思危. 复杂性科学探索[M]. 北京:民主与建设出版社, 1999
[2] SIMON H A. The architecture of complexity[J]. Proceeding of the American Philosophical Society, 1962, 106:467-482
[3] BALDWIN C Y, CLARK K B. Managing in an age of modularity[J]. Harvard Business Review, 1997, 75(5):84-93
[4] 刘欣. 模块化生产网络下中国制造业升级研究[D]. 上海:上海社会科学院, 2016 LIU Xin. China's manufacturing industry upgrade under modular production network[D]. Shanghai:Shanghai Academy of Social Sciences, 2016
[5] 武永娜. 中国高端装备制造业发展研究[D]. 辽宁:辽宁大学, 2017 WU Yongna. Research on the development of high-end equipment manufacturing industry in China[D]. Liaoning:Liaoning University, 2017
[6] STURGEON T J. Modular production networks:a new American model of industrial organization[J]. Industrial and Corporate Change, 2002, 11(3):451-496
[7] 胡海林. 解码:波音之道[J]. 大飞机, 2013(4):31-35 HU Hailin. Decode:Boeing's approach[J]. Jetlines, 2013(4):31-35
[8] 姚鸿翔. 精益生产方式在大型飞机制造中的应用研究[D]. 天津:天津大学, 2011 YAO Hongxiang. Research on application of lean manufacturing method in large aircraft manufacturing[D]. Tianjin:Tianjin University, 2011
[9] 李政. 基于波音787的全球供应链战略模式研究[J]. 科技促进发展, 2012(5):97-102 LI Zheng. Study of global supply chain strategy model basing on Boeing 787[J]. Science & Technology for Development, 2012(5):97-102
[10] 钱镇. 汽车制造业模块化供应关系及协调机制研究[D]. 上海:上海交通大学, 2007(1):1-50 QIAN Zhen. A research on the modularization supply relationship and collaboration mechanism in automobile industry[D]. Shanghai:Shanghai Jiaotong University, 2007
[11] 杨国兵. 我国造船业模块化制造网络研究[D]. 哈尔滨:哈尔滨工程大学, 2010 YANG Guobing. Research on the modular manufacturing networks of shipbuilding industry[D]. Harbin:Harbin Engineering University, 2010
[12] 齐振法. 我国铁路运输业模块化重组研究[D]. 北京:北京交通大学, 2010 QI Zhenfa. Research on modular restructuring of Chinese railway transportation[D]. Beijing:Beijing Jiaotong University, 2010
[13] 黄大莉. 航空装备研制项目的模块化质量控制研究[D]. 南昌:南昌航空大学, 2017 HUANG Dali. Research on modular quality control of aviation equipment development project[D]. Nanchang:Nanchang Hangkong University, 2017
[14] 于欢欢. 区域高端装备制造业技术模块化创新机制研究[D]. 哈尔滨:哈尔滨理工大学, 2017 YU Huanhuan. Research on the technical modular innovation mechanism of regional high-end equipment manufacturing industry[D]. Harbin:Harbin University of Science and Technology, 2017
[15] 戴爱明, 肖灵机. MILDDC算法及其在飞机模块化生产网络分析中的应用[J]. 航空科学技术, 2013(3):68-71 DAI Aiming, XIAO Lingji. An algorithm-MILDDC and its applying in airplane modular production networks analyzing[J]. Aeronautical Science & Technology, 2013(3):68-71
[16] 李苏杭, 李铁. 飞机模块化结构平台构造优化方法[J]. 江苏航空, 2015(4):9-12 LI Suhang, LI Tie. An optimization method of building aircraft modular structure platform[J]. Jiangsu Aviation, 2015(4):9-12
[17] 侯卓兵. 面向模块化配置生产的大型飞机装配规划与仿真技术[J]. 航空制造技术, 2017(4):24-30 HOU Zhuobing. Large aircraft assembly plan and simulation technology for module-based configuration production[J]. Aeronautical Manufacturing Technology, 2017(4):24-30
[18] 范林, 王哲. 模块化技术在飞机研制中的应用[J]. 航空科学技术, 2010(3):19-21 FAN Lin, WANG Zhe. Application of modularization technology at each development stage of aircraft[J]. Aeronautical Science & Technology, 2010(3):19-21
[19] 谢光亚. 基于模块化的大型飞机技术创新路径研究[J]. 工业技术经济, 2011(1):75-79 XIE Guangya. Research on technological innovation path to large aircraft based on modularity theory[J]. Journal of Industrial Technological Economics, 2011(1):75-79
[20] 王海军, 徐伟, 宋红英, 等. 从内部优化到全局协同:模块化生产网络构建策略[J]. 科技管理研究, 2017(1):1-5 WANG Haijun, XU Wei, SONG Hongying et al. From internal optimization to global collaboration:research on the strategies of building modular production networks[J]. Science and Technology Management Research, 2017(1):1-5
[21] 孙晓峰. 模块生产网络研究[J]. 中国工业经济, 2005(9):60-66 SUN Xiaofeng. Research of modular production network[J]. China Industrial Economy, 2005(9):60-66
[22] BALACHANDRA R. Modular design and technological innovation:the case of hard disk drives[R]. UC San Diego:Information Storage Industry Center, 2002:1-4