高扰动模具制造车间的负荷均衡生产控制方法

doi:10.3969/j.issn.1007-7375.2020.01.004

工业工程 ›› 2020, Vol. 23 ›› Issue (1): 23-34.doi: 10.3969/j.issn.1007-7375.2020.01.004

高扰动模具制造车间的负荷均衡生产控制方法

杨小佳, 刘建军, 陈庆新, 毛宁

广东工业大学广东省计算机集成制造重点实验室, 广东广州 510006

收稿日期:2019-01-13 发布日期:2020-02-21
通讯作者: 刘建军(1982-),男,江西省人,副教授,主要研究方向为工业工程、生产计划与控制等.E-mail:jianjun.liu@gdut.edu.cn E-mail:jianjun.liu@gdut.edu.cn
作者简介:杨小佳(1992-),男,广东省人,硕士研究生,主要研究方向为动态生产调度、生产过程控制等
基金资助:
国家自然科学基金资助项目(71572049，51975129，61573109)；广东省特支计划科技创新青年拔尖人才资助项目(2016TQ03X364)；广东省自然科学基金资助项目(2019A1515012158)；广州市珠江科技新星资助项目(201710010004)

A Production Control Method of High Disturbance Mould Manufacturing Workshop Based on Workload Control

YANG Xiaojia, LIU Jianjun, CHEN Qingxin, MAO Ning

Key Laboratory of Computer Integrated Manufacturing System of Guangdong Province, Guangdong University of Technology, Guangzhou 510006, China

Received:2019-01-13 Published:2020-02-21

摘要/Abstract

摘要： 试制性模具生产中，路径与工时各异的零件先机加工再装配，关联零件进度不一致将影响装配开工，而返工返修等高频事故干扰着进度协同。实时决策的调度规则更能及时协同进度，但分散的规则难以在负荷波动且不均衡的车间协同众多零件，将引入投放控制来均衡各任务队列，降低规则协同进度的难度。构建一类耦合投放控制、设备选择与作业分派的多层递阶方法，实验说明其优良性能和各控制层级中面向进度协同与准备时间节省两类规则的关联性。

关键词: 柔性装配作业车间, 序列相关, 进度协同, 负荷控制, 优先度规则

Abstract: In trial-manufacture mould production, parts with different routings and processing time are machined first and then assembled. The inconsistent progress of related parts will affect assembly start-up, while high-frequency accidents such as rework and repair interfere with progress coordination. Real-time decision-making dispatching rules can coordinate production progress timely, but decentralized rules are difficult to coordinate many parts in workshops with fluctuating and unbalanced workload. Workload control method will be introduced to balance the task queues and improve the coordination efficiency of rules. A multi-level hierarchical method with coupling release control, machine selection and dispatching rules is constructed. The excellent performance of the proposed method and the inherent relationship between collaboration-oriented and setup-saving priority rules in different control levels are studied by simulation experiments.

Key words: flexible assembly job-shop, sequence-dependent, progress coordination, workload control, priority dispatching rules

中图分类号:

F406

杨小佳, 刘建军, 陈庆新, 毛宁. 高扰动模具制造车间的负荷均衡生产控制方法[J]. 工业工程, 2020, 23(1): 23-34.

YANG Xiaojia, LIU Jianjun, CHEN Qingxin, MAO Ning. A Production Control Method of High Disturbance Mould Manufacturing Workshop Based on Workload Control[J]. Industrial Engineering Journal, 2020, 23(1): 23-34.

参考文献

[1] 刘建军, 陈庆新, 毛宁, 等. 随机环境下模具企业车间负荷控制方法[J]. 计算机集成制造系统, 2010, 16(2):263-270
LIU Jianjun, CHEN Qingxin, MAO Ning, et al. Workload control approach for mould enterprises in stochastic production[J]. Computer Integrated Manufacturing System, 2010, 16(2):263-270
[2] GRUNDSTEIN S, SCHUKRAFT S, SCHOLZ-REITER B, et al. Coupling order release methods with autonomous control methods-an assessment of potentials by literature review and discrete event simulation[J]. International Journal of Production Management & Engineering, 2015, 3(1):43-56
[3] 来凯, 王小明, 陈庆新, 等. 面向模具项目动态调度问题的优先规则对比研究[J]. 工业工程, 2017, 20(5):31-40
LAI Kai, WANG Xiaoming, CHEN Qingxin, et al. A comparative study of priority rules for mold project dynamic scheduling[J]. Industrial Engineering Journal, 2017, 20(5):31-40
[4] REEJA M, RAJENDRAN C. Dispatching rules for scheduling in assembly jobshops[J]. International Journal of Production Research, 2000, 38(9):2051-2066
[5] NATARA K, MOHAN K M, BABU B, et al. Performance evaluation of priority dispatching rules in multi-level assembly job shops with jobs having weights for flow time and tardiness[J]. The International Journal of Advanced Manufacturing Technology, 2007, 31(7-8):751-761
[6] STEVENSON M, HENDRY L C. Aggregate load-oriented workload control:A review and a re-classification of a key approach[J]. International Journal of Production Economics, 2006, 104(2):676-693
[7] 张春生, 李铁克. 基于WLC的钢铁企业多工序、多路径订单投放方法[J]. 控制与决策, 2013(5):695-700
ZHANG Chunsheng, LI Tieke. Order release in steel enterprise with multi-production stage and multi-production route based on WLC[J]. Control and Decision, 2013(5):695-700
[8] PERONA M, SACCANI N, BONETTI S, et al. Manufacturing lead time shortening and stabilisation by means of workload control:An action research and a new method[J]. Production Planning and Control, 2016, 27(7):660-670
[9] FERNANDES N O, THÜRER M, SILVA C, et al. Improving workload control order release:Incorporating a starvation avoidance trigger into continuous release[J]. International Journal of Production Economics, 2016:S0925527316304091
[10] THÜRER M, STEVENSON M, SILVA C, et al. Workload control and order release:a lean solution for make-to-order companies[J]. Production and Operations Management, 2012, 21(5):1-15
[11] LAND M, STEVENSON M, THÜRER M. Integrating load-based order release and priority dispatching[J]. International Journal of Production Research, 2014, 52(4):15
[12] MISSBAUER H. Order release and sequence-dependent setup times[J]. International Journal of Production Economics, 1997, 49(2):131-143
[13] THÜRER M, SILVA C, STEVENSON M, et al. Controlled order release:a performance assessment in job shops with sequence-dependent set-up times[J]. Production Planning & Control, 2014, 25(7):603-615
[14] THÜRER M, STEVENSON M, SILVA C, et al. Workload control and order release in two-level multi-stage job shops:an assessment by simulation[J]. International Journal of Production Research, 2013, 51(3):869-882
[15] OOSTERMAN B, LAND M, GAALMAN G. The influence of shop characteristics on workload control[J]. International Journal of Production Economics, 2000, 68(1):107-119
[16] KIM S C, BOBROWSKI P M. Evaluating order release mechanisms in a job shop with sequence-dependent setup times[J]. Production and Operations Management, 1995, 4(2):163-180
[17] PHILIPOOM P, RUSSELL R, FRY T. A preliminary investigation of multi-attribute based sequencing rules for assembly shops[J]. International Journal of Production Research, 1991, 29(4):739-753
[18] THÜRER M, SILVA C, STEVENSON M, et al. Improving the applicability of workload control (WLC):the influence of sequence-dependent set-up times on workload controlled job shops[J]. International Journal of Production Research, 2012, 50(22):12
[19] PEREIRA T, SANTORO C. An integrative heuristic method for detailed operations scheduling in assembly job shop systems[J]. International Journal of Production Research, 2011, 49(20):6089-6105

高扰动模具制造车间的负荷均衡生产控制方法

A Production Control Method of High Disturbance Mould Manufacturing Workshop Based on Workload Control

RichHTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价