手机Housing检包线平衡分析及优化设计

doi:10.3969/j.issn.1007-7375.e15-1503

工业工程 ›› 2017, Vol. 20 ›› Issue (2): 71-77.doi: 10.3969/j.issn.1007-7375.e15-1503

手机Housing检包线平衡分析及优化设计

李军¹, 范丙毅¹, 李翔宇²

1. 桂林电子科技大学商学院, 广西桂林 541004;
2. 桂林电子科技大学职业技术学院, 广西北海 536000

收稿日期:2015-10-17 出版日期:2017-04-30 发布日期:2017-05-13
作者简介:李军(1958-),男,陕西省人,教授,主要研究方向工业工程.
基金资助:
广西社会科学基金资助项目（15FGL010）

The Balance Analysis and Optimal Design in a Mobile Phone Housing Inspection Line

LI Jun¹, FAN Bingyi¹, LI Xiangyu²

1. School of Business, Guilin University of Electronic Technology, Guilin 541004, China;
2. Vocational Technical Institute, Guilin University of Electronic Technology, Beihai 536000, China

Received:2015-10-17 Online:2017-04-30 Published:2017-05-13

摘要/Abstract

摘要： 针对某电子企业手机Housing检包线目前存在的生产效率低下、劳动成本上升的问题，依据作业测定技术所获得的数据，结合Flexsim仿真技术分析检包线瓶颈，运用方法研究分别从作业方式和工站布置两个方面，对检包线进行平衡分析和优化设计，并通过Flexsim建立优化后的检包线仿真模型验证其有效性，采用新方案后，在成本降低的情况下，达到了平衡各工站负荷、提高生产效率的目的。研究表明，工业工程理论方法与仿真技术相结合，可使制造系统的改善更加有效。

关键词: 作业测定, 方法研究, Flexsim仿真, Housing检包线, 优化设计

Abstract: In order to solve the problems of low production efficiency and high labour costs in a mobile phone housing inspection line, the bottleneck of inspection line is analyzed based on the data obtained from work measurement and Flexsim simulation technology. From two aspects of the operation mode and the workstation layout, the inspection line is optimized and re-designed by using method engineering. With the help of Flexsim, simulation test is carried out to evaluate the implementation effect of the optimization scheme. In the case of cost reduction, the workstation load and production efficiency are improved after the adoption of the new scheme. The results show that the combination of IE method and simulation technology can make the improvement of the manufacturing system more effective.

Key words: work measurement, method engineering, Flexsim simulation, housing inspection line, optimal design

中图分类号:

F273

李军, 范丙毅, 李翔宇. 手机Housing检包线平衡分析及优化设计[J]. 工业工程, 2017, 20(2): 71-77.

LI Jun, FAN Bingyi, LI Xiangyu. The Balance Analysis and Optimal Design in a Mobile Phone Housing Inspection Line[J]. Industrial Engineering Journal , 2017, 20(2): 71-77.

参考文献

[1] 兰爽, 李丹婷. 工作研究在定子装配线优化中的应用[J]. 工业工程, 2010, 13(3): 126-129. LAN Shuang, LI Danting. Application of work study to the redesign of a stator assembly line [J]. Industrial Engineering Journal, 2010, 13(3): 126-129.
[2] 武超然, 李芳. 基于方法研究及仿真的汽车零部件流程优化[J]. 工业工程与管理, 2014, 19(5): 43-51. WU Chaoran, LI Fang. To improve and optimize business process based on methods study and witness simulation [J]. Industrial Engineering and Management, 2014, 19(5): 43-51.
[3] 程晓娟, 曾德富, 全春光. 工作研究在某笔记本测试线效率提升中的应用[J]. 工业工程与管理, 2010, 15(1): 121-125. CHENG Xiaojuan, ZENG Defu, QUANG Chunguang. The application of work study in the efficiency improvement of laptop test Line [J]. Industrial Engineering and Management, 2010, 15(1): 121-125.
[4] CARICATO P, GRIECO A. Using simulated annealing to design a material-handling system[J]. IEEE Intelligent Systems, 2005, 20(4): 26-30.
[5] LIN J T, WANG F K, WU C K. Simulation analysis of the connecting transport AMHS in a wafer fab[J]. IEEE Transactions on Semiconductor Manufacturing, 2003, 16(3): 555-564.
[6] WONG M M, TAN C H, ZHANG J B, et al. On-line reconfiguration to enhance the routing flexibility of complex automated material handling operations[J]. Robotics and Computer-Integrated Manufacturing, 2007, 23(3): 294-304.
[7] 毛健, 乔金友, 王立军, 等. 基于Witness的汽车零部件生产物流系统仿真研究[J]. 工业工程, 2011, 14(3): 124-127. MAO Jian, QIAO Jinyou, WANG Lijun, et al. Simulation study on production flow in auto part manufacturing based on witness [J]. Industrial Engineering Journal, 2011, 14(3): 124-127.
[8] 王建青, 邵延君, 刘永姜. 基于Flexsim的炼镁生产线仿真与优化[J]. 工业工程, 2009, 12(2): 78-81. WANG Jianqing, SHAO Yanjun, LIU Yongjiang. Simulation and optimization of magnesium smelting process based on Flexsim [J]. Industrial Engineering Journal, 2009, 12(2): 78-81.
[9] 龚立雄, 谭国, 黄敏, 等. 基于Flexsim的摩托车涂装生产线仿真与优化研究[J]. 工业工程与管理, 2014, 19(3): 122-126. GONG Lixiong, TAN Guo, HUANG Min, et al. Simulation and optimization of motorcycle coating product line based on Flexsim [J]. Industrial Engineering and Management, 2014, 19(3): 122-126.
[10] 兰秀菊, 陈勇, 汤洪涛. SMT生产线平衡的持续改善方析[J]. 工业工程与管理, 2006, 11(2): 109-111. LAN Xiuju, CHEN Yong, TANG Hongtao. Balancing and continuous improvement of SMT production line [J]. Industrial Engineering and Management, 2006, 11(2): 109-111.
[11] 李钢, 安胜敏, 廖俊军. 汽车涂装生产线的优化与仿真[J]. 工业工程, 2008, 11(6): 71-75. LI Gang, AN Shengmin, LIAO Junjun. The optimization and simulation of automobile spread production line [J]. Industrial Engineering Journal, 2008, 11(6): 71-75.
[12] 葛安华, 刘超, 孙晶. 基于市场需求变化的流水线最佳生产节拍选择[J]. 工业工程, 2011, 14(1): 96-100. GE Anhua, LIU Chao, SUN Jing. Market-demand adaptive method for best cycle time selection of production line [J]. Industrial Engineering Journal, 2011, 14(1): 96-100.
[13] 曾敏刚, 李双. 电源适配器生产现场改善与装配线平衡[J]. 工业工程, 2010, 13(4): 117-123. ZENG Mingang, LI Shuang. Improvement of process and line balance in a power adapter assembly line [J]. Industrial Engineering Journal, 2010, 13(4): 117-123.
[14] 陈勇, 汤科峰, 林飞龙, 等. 企业CD段流水线的瓶颈分析与平衡改善[J]. 工业工程与管理, 2008, 13(1): 112-115. CHEN Yong, TANG Kefeng, LIN Feilong, et al. The bottleneck analysis and balance improvement of flow line in the enterprise's CD section [J]. Industrial Engineering and Management, 2008, 13(1): 112-115.
[15] 孙建华, 高广章, 蒋志强, 等. 程序分析法在产线平衡中的应用[J]. 机械设计与制造, 2005(5): 148-150. SUN Jianhua, GAO Guangzhang, JIANG Zhiqiang, et al. The application of program analysis method in streamline balance [J]. Machinery Design & Manufacture, 2005(5): 148-150.

手机Housing检包线平衡分析及优化设计

The Balance Analysis and Optimal Design in a Mobile Phone Housing Inspection Line

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

本文评价

[1]	吴健, 鲁芳, 罗定提. 基于游客感知服务质量的多目标旅游产品优化设计[J]. 工业工程, 2018, 21(3): 41-48.
[2]	张磊, 李中原. 基于IE方法的组装生产线平衡研究——以A公司为例[J]. 工业工程, 2017, 20(3): 45-52,74.
[3]	张洪亮, 骆文斌. 基于EVSM及仿真技术的精益生产改善研究[J]. 工业工程, 2017, 20(2): 64-70.
[4]	侯琳娜1,2, 王海燕3, 贾伟伟2. 液晶显示器外壳生产线平衡分析与改善[J]. 工业工程, 2011, 14(4): 124-128.