基于Jack远程监控操作台人机工效评价

doi:10.3969/j.issn.1007-7375.2019.05.004

工业工程 ›› 2019, Vol. 22 ›› Issue (5): 25-31.doi: 10.3969/j.issn.1007-7375.2019.05.004

基于Jack远程监控操作台人机工效评价

刘力卓¹, 赵义格^1,2, 韩玉琪¹, 何明¹

1. 燕山大学经济管理学院, 河北秦皇岛 066004;
2. 浙江吉利汽车有限公司张家口分公司, 河北张家口 075000

收稿日期:2018-08-28 出版日期:2019-10-31 发布日期:2019-10-29
通讯作者: 赵义格(1989-),女,河北省人,硕士,主要研究方向为人因工程,E-mail:Yige.Zhao@geely.com. E-mail:Yige.Zhao@geely.com
作者简介:刘力卓(1971-),女,河北省人,教授,硕士,主要研究方向为人因工程、港口物流
基金资助:
河北省科学技术研究与发展计划资助项目（14457667D）

An Ergonomics Evaluation of Remote Monitoring Console Based on Jack

LIU Lizhuo¹, ZHAO Yige^1,2, HAN Yuqi¹, HE Ming¹

1. Economic and Management Institute, Yanshan University, Qinhuangdao 066004, China;
2. Zhangjiakou Branch, Zhejiang Geely Automobile Co., Ltd, Zhangjiakou 075000, China

Received:2018-08-28 Online:2019-10-31 Published:2019-10-29

摘要/Abstract

摘要： 为了提高远程监控操作员的工作舒适度，以DK公司远程监控中心操作台为研究对象，以工效学为理论依据，利用Jack软件，进行数字人模型的建立，对远程监控操作台建模仿真。对数字人工作时的舒适度和疲劳度进行检验，发现其存在的问题，并提出改善方法。结果表明，通过对座椅的构造优化与尺寸调节、对数字人安装脚垫板等方式，可以显著提高数字人的舒适度。

关键词: Jack软件, 工效学, 远程监控操作台

Abstract: In order to improve the work comfort of the remote monitoring operator, the research object of this paper is the remote monitoring center console of DK company. The theoretical basis is ergonomics. Using the Jack software, the digital human model is established, and the remote monitoring console is simulated. The comfort and fatigue of digital people are tested to find out the problems, and the improvement methods are proposed. The results show that the digital comfort can be significantly improved by optimizing the structure and size of the seat and installing the foot pad for the digital person.

Key words: Jack software, ergonomics, remote monitoring console

中图分类号:

TB18

刘力卓, 赵义格, 韩玉琪, 何明. 基于Jack远程监控操作台人机工效评价[J]. 工业工程, 2019, 22(5): 25-31.

LIU Lizhuo, ZHAO Yige, HAN Yuqi, HE Ming. An Ergonomics Evaluation of Remote Monitoring Console Based on Jack[J]. Industrial Engineering Journal , 2019, 22(5): 25-31.

参考文献

[1] 吴新林. VDT办公系统中的人机关系研究[D]. 南京:南京林业大学, 2011:1-2. WU Xinlin. Research on human-computer relationship in VDT office system[D]. Nanjing:Nanjing Forestry University, 2011:1-2.
[2] GUNDE Satish Kumar, ABHISHEK Das. Analysis and ergonomic improvement of working postures in cast house work station using JACK modelling[J]. Human Factors Modelling and Simulation, 2012, 3(1):16-27
[3] 王海燕, 王朝增, 吴迪冲, 等. 人因工效学在生产工位作业中的分析及应用[J]. 浙江理工大学学报, 2013, 30(4):536-538 WANG Haiyan, WANG Chaozeng, WU Dichong, et al. Analysis and application of human ergonomics in production station operation[J]. Journal of Zhejiang Sci-Tech University, 2013, 30(4):536-538
[4] SHAFTI Ali, LAZPITA Beatriz Urbistondo, ELHAGE Oussama, et al. Analysis of comfort and ergonomics for clinical work environments[C/OL]. (2016-10-18). http://ieeexplore.ieee.org/document/7591091.
[5] 徐慧泽, 刘璐, 杨树森, 等. 基于人机工程的船舶舾装工艺合理性评估[J]. 江苏科技大学学报, 2016, 30(1):8-17 XU Huize, LIU Lu, YANG Shusen, et al. Assessment of rationality of armoring technology based on ergonomics[J]. Journal of Jiangsu University of Science and Technology, 2016, 30(1):8-17
[6] 尹航. 装载机驾驶舱人机工程改进设计研究[J]. 机械设计, 2017, 34(8):120-123 YIN Hang. Research on improved design of ergonomics for loader cockpit[J]. Mechanical Design Journal, 2017, 34(8):120-123
[7] 兰爽. 基于Jack虚拟仿真技术的人因工效分析[J]. 工业工程, 2017, 20(6):96-100 LAN Shuang. An ergonomic analysis based on Jack virtual simulation technology[J]. Industrial Engineering Journal, 2017, 20(6):96-100
[8] 刘力卓, 方兴祥, 赵义格. 和谐号动车座椅的人因学改善研究[J]. 工业工程, 2016, 19(5):16-23 LIU Lizhuo, FANG Xingxiang, ZHAO Yige. Improvement research of human factors on CRH seats[J]. Industrial Engineering Journal, 2016, 19(5):16-23
[9] 刘社明, 王小平, 陈登凯, 等. 基于Jack的驾驶舱仿真及人机工效分析[J]. 计算机与现代化, 2013, 17(8):106-108 LIU Sheming, WANG Xiaoping, CHEN Dengkai, et al. Jack-based cockpit simulation and ergonomics analysis[J]. Computer and Modernization Journal, 2013, 17(8):106-108
[10] 钮建伟, 张乐. Jack人因工程基础及应用实例[M]. 北京:电子工业出版社, 2012.
[11] 张磊, 石学岗, 江黎, 等. 座椅人机工程设计研究综述[J]. 机械设计, 2014, 31(6):98-101 ZHANG Lei, SHI Xuegang, JIANG Li, et al. Overview on ergonomics design of seat[J]. Journal of Machine Design, 2014, 31(6):98-101
[12] 刘力卓, 张文, 何明, 等. 基于人机工程学的牙科椅舒适度改善研究[J]. 工业工程, 2018, 21(3):100-108 LIU Lizhuo, ZHANG Wen, HE Ming, et al. An improvement research on comfort of dental chair based on ergonomics[J]. Industrial Engineering Journal, 2018, 21(3):100-108

基于Jack远程监控操作台人机工效评价

An Ergonomics Evaluation of Remote Monitoring Console Based on Jack

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

编辑推荐

Metrics

本文评价

[1]	刘力卓, 张文, 何明, 韩玉琪. 基于人机工程学的牙科椅舒适度改善研究[J]. 工业工程, 2018, 21(3): 100-108.
[2]	李霞霞, 申黎明, 方菲. 基于模糊综合评判的职员办公椅工效学[J]. 工业工程, 2018, 21(2): 81-86.
[3]	刘力卓, 方兴祥, 赵义格. 和谐号动车座椅的人因学改善研究[J]. 工业工程, 2016, 19(5): 16-23.