A Study of Sampling Inspection Plan for Key Materials of Distribution Network

doi:10.3969/j.issn.1007-7375.2021.03.019

Abstract

Abstract: Aiming at the shortcoming of the current sampling inspection system in distribution network that it is inconsistent in strictness with various product batch sizes, an adjusting sampling plan for key materials of distribution network is proposed, which is based on the commonly used MIL–STD-1916 sampling standard. The proposed sampling plan combines with the actual sampling inspection of power grid, meets the requirements of four "one hundred percent" and (n|0) rules in inspection documents of power grid, and does not increase the current workload of sampling inspection. The research results can be applied to the sampling inspection for procurement of distribution network materials in power grid.

Key words: materials of distribution network, sampling inspection, adjusting method, MIL-STD-1916 sampling standard

CLC Number:

TM-9

XIANG Bin, LIU Zhixiong, YAO Yao, ZHANG Kunyi. A Study of Sampling Inspection Plan for Key Materials of Distribution Network[J]. Industrial Engineering Journal, 2021, 24(3): 146-152.

References

[1] SOMMER A, STELAND A. Multistage acceptance sampling under nonparametric dependent sampling designs[J]. Journal of Statistical Planning and Inference, 2019, 199: 89-113
[2] WU H, GOVINDARAJU K. Computer-aided variables sampling inspection plans for compositional proportions and measurement error adjustment[J]. Computers & Industrial Engineering, 2014, 72: 239-246
[3] FERRELL JR W G, CHHOKER A. Design of economically optimal acceptance sampling plans with inspection error[J]. Computers & Operations Research, 2002, 29(10): 1283-1300
[4] 宋保维, 毛昭勇, 鲍亚东, 等. 基于质量标准的计数抽样检验优化方法[J]. 计算机工程, 2008, 34(3): 256-257
SONG Baowei, MAO Zhaoyong, BAO Yadong, et al. Sampling inspection optimization based on quality standard[J]. Computer Engineering, 2008, 34(3): 256-257
[5] 晏爱君. 基于不同质量特性指标的抽检方案研究[D]. 西安: 西安电子科技大学, 2016.
YAN Aijun. Study on acceptance sampling plan based on different quality characteristics index[D]. Xi'an: Xidian University, 2016.
[6] 丁卫娟. MIL-STD-1916 抽样标准在Tiger外壳进料检验中的应用[D]. 上海: 上海交通大学, 2011.
DING Weijuan. The application of MIL-STD-1916 on tiger cabinet's incoming inspection[D]. Shanghai: Shanghai Jiao Tong University, 2011.
[7] Department of defense test method standard. MIL-STD-1916, DoD preferred methods for acceptance of product[S]. United states of America, 1996.
[8] 井伟, 肖少非, 杨店飞. 基于分类评价的出厂试验抽检策略研究[J]. 物流工程与管理, 2018, 40(9): 148-149
JING Wei, XIAO Shaofei, YANG Dianfei. Research on sampling strategy of factory test based on classified evaluation[J]. Logistics Engineering and Management, 2018, 40(9): 148-149
[9] 徐杰, 屈挺, 聂笃宪, 等. 基于持续抽检的电力物资多阶段动态采购模型及系统[J]. 工业工程, 2015, 18(4): 132-139
XU Jie, QU Ting, NIE Duxian, et al. A multi-stage sourcing model and system for electric power materials based on continuous sampling inspection[J]. Industrial Engineering Journal, 2015, 18(4): 132-139
[10] 刘平原, 吴晓峰. 电网物资质量数据分析模型研究及应用[J]. 企业管理, 2016, 2: 284-285
LIU Pingyuan, WU Xiaofeng. Research and application of data analysis model of power grid material quality[J]. Enterprise Management, 2016, 2: 284-285
[11] 施泉生, 郑笑姗. 计数调整型抽样标准在电度表质量验收中的应用[J]. 上海电力学院学报, 1995, 11(3): 65-71
SHI Quansheng, ZHENG Xiaoshan. Uses of sampling procedures for adjustable inspection by attributes in alternating current watt-hour meter acceptance inspection[J]. Journal of Shanghai Institute of Electric Power, 1995, 11(3): 65-71
[12] 袁建国. 抽样检验原理与应用[M]. 北京: 中国计量出版社出版社, 2006.
[13] 肖惠, 张玉柱. 计数抽样检验程序第1部分: 按接收质量限(AQL)检索的逐批检验抽样计划理解与实施[M]. 北京: 中国标准出版社, 2003.