基于元件组合优化的电控板装配作业分配

工业工程 ›› 2011, Vol. 14 ›› Issue (3): 110-114.

基于元件组合优化的电控板装配作业分配

华南农业大学信息学院，广东广州 510642

出版日期:2011-06-30 发布日期:2011-07-08
作者简介:陈建国（1963-），男，湖南省人，教授，博士，主要研究方向为企业IE优化与信息化，企业管控一体化与信息化.
基金资助:
华南农业大学校长基金资助项目（K08171）

Optimal Task Assignment of Electric Control Board Assembly Based on Element Combination

College of Informatics, South China Agricultural University, Guangzhou 510642, China)

Online:2011-06-30 Published:2011-07-08

摘要/Abstract

摘要： 以电控板装配的手插件工序为研究对象，在作业标准化的基础上，结合生产工艺要求与元件特征属性，利用聚类分析方法对元件进行分类，确定其优先分配顺序，提出了一种基于元件组合优化的电控板装配作业分配方法，较好地解决了双手作业负荷与装配线平衡问题。以某企业A型电控板为例，通过上述方法确保各工位内部作业平衡，使线平衡率提高了22.13％，每小时产量提高了35.99％，从而验证了方法的有效性。

关键词: 电控板装配, 聚类分析, 装配线平衡

Abstract: An electric control board assembly process is studied for line balance improvement. To do so, according to the production process requirements, the operations in the process are standardized. Then, clustering analysis is carried out to the elements that should be assembled onto the electric control board. Based on the results of clustering analysis, the elements are grouped and their assembling order is determined. The assembling tasks for the element groups are optimally assigned to the workstations. In this way, the electric control board assembly line balance is improved. This method is applied to an enterprise as a case, results show that the line balance ratio is improved by 22.13% and productivity is increased by 35.99%. This is a significant improvement.

Key words: electric control board assembly, clustering analysis, line balance

陈建国，陈泳钊，杨春. 基于元件组合优化的电控板装配作业分配[J]. 工业工程, 2011, 14(3): 110-114.

Chen Jian-guo， Chen Yong-zhao， Yang Chun. Optimal Task Assignment of Electric Control Board Assembly Based on Element Combination[J]. Industrial Engineering Journal , 2011, 14(3): 110-114.

参考文献

［1］Cristóbal Miralles, José P.GarcíaSabater, Carlos Andrés, et al. Branch and bound procedures for solving the assembly line worker assignment and balancing problem: application to sheltered work centers for disabled［J］.Discrete Applied Mathematics, 2008, 156(3): 352-367. ［2］Joaquín Bautista, Jordi Pereira. A dynamic programming based heuristic for the assembly line balancing problem［J］. European Journal of Operational Research, 2009, 194(3): 787-794. ［3］Armin Scholl，Christian Becker. Stateoftheart exact and heuristic solution procedures for simple assembly line balancing［J］. European Journal of Operational Research, 2006, 168: 666-693. ［4］何善平, 奚立峰. 发动机装配线平衡方法研究［J］. 工业工程,2005,8(3)：83-88. ［5］徐炜达, 肖田元. 可跨工位操作的随机混流装配线平衡问题研究［J］. 系统仿真学报,2009,21(18)：5896-5901. ［6］秦永法,赵明扬,陈书宏. 基于遗传退火算法的装配线设计多目标优化方法［J］. 计算机集成制造系统,2004,10(11)：1416-1420. ［7］Sophie D. Lapierre, Angel Ruiz, Patrick Soriano. Balancing assembly lines with tabu search［J］. European Journal of Operational Research, 2006, 168(3): 826-837. ［8］Stefan Bock, Otto Rosenberg. A new parallel breadth first tabu search technique for solving production planning problems［J］. International Transactions in Operational Research, 2000, 7(6): 625-635. ［9］Christian Becker, Armin Scholl. A survey on problems and methods in generalized assembly line balancing［J］. European Journal of Operational Research, 2006, 168(3): 694-715. ［10］Gavriel Salvendy. 工业工程手册：第1分册［M］. 北京：清华大学出版社,2005:264-270.  ［11］刘胜军. 精益生产方式现场IE［M］. 深圳：海天出版社,2002:172-180. ［12］Michael Laszlo，Sumitra Mukherjee. A genetic algorithm that exchanges neighboring centers for kmeans clustering［J］. Pattern Recognition Letters, 2007, 28(16): 2359-2366.

[1]	杨武成, 程文明. 求解考虑顺序相关调整时间的双边装配线平衡问题的变邻域搜索算法[J]. 工业工程, 2019, 22(5): 68-74.
[2]	段移庭，苏平，郑晨鸣. 随机型双边混流装配线平衡问题的两阶段求解方法研究[J]. 工业工程, 2016, 19(2): 134-142.
[3]	罗文德，陈庆新，毛宁，俞爱林，刘建军. 基于聚类和统计分析的模具工序标准工时制定方法[J]. 工业工程, 2013, 16(4): 126-132.
[4]	宋林，张则强，程文明，余庆良. 随机型双边装配线平衡问题的一种启发式算法[J]. 工业工程, 2011, 14(4): 129-134.
[5]	郑永前，于胜男，王永生. 一种基于属性约简和SOM的客户细分方法[J]. 工业工程, 2011, 14(2): 31-36.
[6]	戴立操1,2, 李鹏程2, 张力2,3. 核电厂安全相关的组织因素分类[J]. 工业工程, 2011, 14(1): 1-5.
[7]	廖波. 基于聚类的粒子群优化算法在MES调度中的应用[J]. 工业工程, 2011, 14(1): 53-57.