再制造系统成本结构与市场结构的关系研究

摘要/Abstract

摘要：

消费者的自主决策能力和产品组合的成本结构会影响再制造系统的生产决策，进而决定市场结构。本文分析了制造商和第三方制造构成的一个两阶段供应链博弈模型，考虑了消费者基于回售预期和效用评估的自主决策能力，分析成本结构对生产决策、许可契约、产业结构的影响。结果表明，新产品的高成本会使OEM放弃生产策略，转而谋求许可费用最大化；新产品和再制造品的联合低成本是形成混合市场的唯一条件；许可费是把双刃剑，调控消费者在新产品、再制造品之间的分布。

关键词: 再制造, 消费者效用, 成本结构, 许可策略

Abstract:

Both the ability of consumers to independently make buying decision and the cost structure determine the producing decision, and thus establish the market structure in remanufacturing system. This paper a game supply chain model, consisting of one original manufacturer and one third-party, is established to analyze how the cost structure influences producing decision, license fee, and market structure. The results indicate that the high cost of new product will compel OEM (orignal equiqment manufactuce) to give up production operation in the second stage; that simultaneous lower cost is the unique condition for hybrid market of new product and remanufactured product; that license fee is a rapier, controlling the consumer distribution between new product and remanufactured product.

Key words: remanufacturing, consumer utility, cost structure, license strategy

李帮义，顾蕊，李宁，刘志. 再制造系统成本结构与市场结构的关系研究[J]. 工业工程.

Li Bang-yi, Gu Rui, Li Ning, Liu Zhi. The Relationship Between Cost Structure and Market Structure in Remanufacturing System[J]. Industrial Engineering Journal .

参考文献

［1］徐滨士.再制造与循环经济［M］.北京:科学出版社,2007.
［2］Fisher M M, Mark F E, Kingsbury T, et al. Energy recovery in the sustainable recycling of plastics from end-of-life electrical and electronic products［C］.2005 IEEE International Symposium on Electronics & the Environment(2005 IEEE/SUMMIT), 2005: 83-92.
［3］Ilgin M A, Gupta S M. Environmentally conscious manufacturing and product recovery (ECMPRO): a review of the state of the art［J］. Journal of environmental management, 2010, 91(3): 563-591.
［4］Jacobs B W, Subramanian R. Sharing responsibility for product recovery across the supply chain［J］. Production and Operations Management, 2012, 21(1): 85-100.
［5］Atasu A, zdemir , Van Wassenhove L N. Stakeholder perspectives on e-waste take-back legislation［J］. Production and Operations Management, 2013, 22(2): 382-396.
［6］Majumder P, Groenevelt H. Competition in remanufacturing［J］. Production and Operations Management, 2001, 10(2): 125-141.
［7］李帮义,姜金德,杨丽. 再制造系统外部竞争要素的作用与委托代理机制［J］.系统科学与数学,2011:31(11):1423-1429.
Li Bang-yi, Jiang Jin-de, Yang Li. Research on outside competitive effect and principal- agent mechanism of remanufacturing system［J］. Journal of Systems Science and Mathematical Sciences, 2011:31(11): 1423-1429.
［8］Ovchinnikov A.Revenue and cost management for remanufactured products［J］. Production and Operations Management,2011,20(6):824-840.
［9］黄祖庆,易荣华,达庆利.第三方负责回收的再制造闭环供应链决策结构的效率分析［J］.中国管理科学, 2008,16,3:73-77.
Huang Zhu-qing, Yi Rong-hua, Da Qing-li. Study on the efficiency of the closed-loop chains with remanufacture based on third-party collecting［J］. Chinese Journal of Management Science, 2008,16,3:73-77.
［10］Ferguson M E, Toktay L B. The effect of competition on recovery strategies［J］. Production and operations management, 2006, 15(3): 351-358.
［11］Subramanian R, Subramanyam R. Key factors in the market for remanufactured products［J］. Manufacturing & Service Operations Management,2012,14(2): 315-326. 
［12］Oraiopoulos N, Ferguson M E, Toktay L B. Relicensing as a secondary market strategy［J］. Management Science,2012, 58(5): 1022-1037.
［13］Jacobs B W, Subramanian R. Sharing responsibility for product recovery across the supply chain［J］.Production and Operations Management,2012,21(1): 85-100. 
［14］Toktay L B, Wei D. Cost allocation in manufacturing-remanufacturing operations［J］. Production and Operations Management,2011,20(6):841-847.
［15］Atasu A, Toktay L B, Van Wassenhove L N. How collection cost structure drives a manufacturers reverse channel choice［J］. Production and Operations Management, 2013, 22(5): 1089-1102.
［16］Ferrer G, Swaminathan J M. Managing new and remanufactured products［J］. Management Science,2006, 52(1): 15-26.
［17］Kaya O. Incentive and production decisions for remanufacturing operations［J］. European Journal of Operational Research,2010,201(2): 442- 453.
［18］Atasu A, Sarvary M, Van Wassenhove L N. Remanufacturing as a marketing strategy［J］.Management Science,2008, 54(10):1731-1746.
［19］史成东,陈菊红,郭福利，等. Loss-averse 闭环供应链协调［J］.系统工程理论与实践, 2011,31(9):1668-1673.
Shi Cheng-dong, Chen Ju-hong, Guo Fu-li, et al. On closed-loop supply chain coordination with loss-averse retailer［J］.System engineering -theory & Practice,2011,31(9):1668-1673.

[1]	曹炳汝, 朱博文. 考虑再制造投资的闭环供应链网络均衡模型[J]. 工业工程, 2021, 24(3): 1-9.
[2]	路正南, 杨鹏. 考虑回收品质量可控的再制造闭环供应链决策[J]. 工业工程, 2021, 24(1): 27-34.
[3]	张敏, 李思雨, 石纯来, 廖治通. 基于微分对策的闭环供应链中制造商合作策略选择[J]. 工业工程, 2020, 23(3): 19-29.
[4]	舒秘. 不同渠道结构下再制造商进入对制造商定价的影响[J]. 工业工程, 2020, 23(3): 30-37.
[5]	陈伟达, 史郁洁. 碳交易政策下考虑渠道拓展的制造/再制造企业生产决策研究[J]. 工业工程, 2020, 23(2): 1-8.
[6]	吕晓慧, 曾小燕. 考虑众筹成功率的产品众筹定价策略研究[J]. 工业工程, 2019, 22(6): 89-95.
[7]	陈伟达, 史文瑾. 资金约束下考虑碳配额质押融资的制造/再制造生产决策研究[J]. 工业工程, 2019, 22(3): 1-8.
[8]	但颖, 代颖, 马祖军. 具有延保服务的闭环供应链回收渠道选择[J]. 工业工程, 2019, 22(2): 42-48.
[9]	杨爱峰, 詹倩颖, 宋明珠, 胡小建. 授权模式下OEM和第三方的生产和回收定价竞争策略[J]. 工业工程, 2019, 22(1): 36-44.
[10]	刘文杰, 沈宁宁, 张璟, 耿孙悦, 朱一格, 刘勇. 考虑渠道权力结构和产品双重差异的再制造闭环供应链最优定价决策[J]. 工业工程, 2018, 21(6): 54-63.
[11]	聂佳佳, 熊璐洁. 新产品质量对闭环供应链再制造模式选择的影响[J]. 工业工程, 2018, 21(5): 31-39,63.
[12]	聂佳佳, 钟玲. 存在绿色消费者的再制造模式选择策略[J]. 工业工程, 2018, 21(2): 9-18.
[13]	杜茂康, 林盼盼, 王强. 基于异质需求的闭环供应链收益共享-费用分担契约协调研究[J]. 工业工程, 2018, 21(1): 30-35,66.
[14]	梁晓豪, 黄祖庆, 孟丽君, 杨玉香. 两个生产阶段下闭环供应链产品定价策略研究[J]. 工业工程, 2017, 20(6): 47-55.
[15]	陈伟达, 毕兴明. 考虑碳税和资金约束制造/再制造生产决策研究[J]. 工业工程, 2017, 20(5): 1-8.