A Study of the Quality Batch Model Considering Equipment Degradation and Rework

doi:10.3969/j.issn.1007-7375.2020.03.008

Abstract

Abstract: In order to get the maximum quality batch, the calculation method of expected profit value is studied under the marginal effect of rework cost. The production process is divided into two stages in which one is continuous processing without rework and the other is continuous processing requiring rework. The batch calculation formula under the quality control strategy and the quality batch corresponding to the maximum profit under the marginal cost are given. Monte Carlo simulation and Design Expert 8.0.6 software are used to work out the result. The expected profit value of rework cost is compared with that of no rework cost. Through the digital experiment, the research shows that the quality lot size considering the marginal effect of rework cost is larger than the general economic lot size, and the expected profit at maturity is also the largest.

Key words: production batch, rework, response surface method, expected profit

CLC Number:

F273
TP391

FANG Yexiang, WANG Hongdong, QIAN Qing, FAN Shuhai. A Study of the Quality Batch Model Considering Equipment Degradation and Rework[J]. Industrial Engineering Journal, 2020, 23(3): 59-64,74.

References

[1] GIRI B C, DOHI T. Exact formulation of stochastic EMQ model for an unreliable production system[J]. Journal of the Operational Research Society, 2005, 56(5): 563-575
[2] KIM C H, HONG Y. An optimal production run length in deteriorating production processes[J]. International Journal of Production Economics, 1999, 58: 183-189
[3] CHEN Y C. An optimal production and inspection strategy with preventive maintenance error and rework[J]. Journal of Manufacturing Systems, 2013, 32: 99-106
[4] 卢震, 郭巧顺, 徐健. 基于周期性不完全预防性维修的最优经济生产批量决策[J]. 系统工程理论与实践, 2017, 37(10): 2621-2629
LU Zhen, GUO Qiaoshun, XU Jian. Optimal economic production batch decision based on periodic incomplete preventive maintenance[J]. Computer Integrated Manufacturing Systems, 2017, 37(10): 2621-2629
[5] CHAKRABORTY T, GIRI B, CHAUDHURI K. Production lotsizing with process deterioration and machine breakdown under inspection schedule[J]. Omega, 2009, 37(2): 257-71
[6] TAPIERO C S. Continuous quality production and machine maintenance[J]. Naval Research Logistic, 1986, 33(3): 489-499
[7] RADHOUI M, REZGN, CHELBI A. Integrated maintenance and control policy based on quality control[J]. Computers & Industrial Engineering, 2010, 58(3): 443-51
[8] 邵校, 陈志祥, 伏开放. 考虑产品合格率衰变的设备维修与生产决策[J]. 工业工程与管理, 2017, 22(3): 7-15
SHAO Xiao, CHEN Zhixiang, FU Kaifang. Equipment maintenance and production decision considering product qualification rate decay[J]. Industrial Engineering and Management, 2017, 22(3): 7-15
[9] 冷乔, 王丽亚, 赵世雄, 等. 多机串行系统的生产批量与维护计划集成优化[J]. 计算机集成制造系统, 2016, 22(8): 1945-1952
LENG Qiao, WANG Liya, ZHAO Shixiong, et al. Integration of production batch and maintenance plan for multi-machine serial system[J]. Computer Integrated Manufacturing Systems, 2016, 22(8): 1945-1952
[10] 周炳海, 刘玉旺. 考虑设备劣化及随机需求的最优生产周期模型[J]. 哈尔滨工程大学学报, 2017, 38(6): 950-955
ZHOU Binghai, LIU Yuwang. Optimal production cycle model considering equipment degradation and stochastic demand[J]. Journal of Harbin Engineering University, 2017, 38(6): 950-955
[11] 甘婕, 曾建潮. 考虑劣化状态的单机调度与维修决策集成模型[J]. 控制与决策, 2016, 31(3): 513-520
GAN Jie, ZENG Jianchao. Integrated model for single machine scheduling and maintenance decision considering degraded state[J]. Control and Decision, 2016, 31(3): 513-520
[12] 甘婕, 曾建潮, 张晓红. 考虑性能可靠度约束的维修决策模型[J]. 计算机集成制造系统, 2016, 22(4): 1079-1087
GAN Jie, ZENG Jianchao, ZHANG Xiaohong. Maintenance decision model considering performance reliability constraints[J]. Computer Integrated Manufacturing Systems, 2016, 22(4): 1079-1087
[13] 周炳海, 刘子龙. 考虑质量损失的退化系统维护建模[J]. 浙江大学学报(工学版), 2016, 50(12): 2270-2276
ZHOU Binghai, LIU Zilong. Degraded system maintenance modeling considering mass loss[J]. Journal of Zhejiang University (Engineering Science), 2016, 50(12): 2270-2276
[14] 成国庆, 周炳海, 李玲. 劣化系统的生产、质量控制与视情维护联合建模与优化[J]. 计算机集成制造系统, 2019, 25 (7): 1620-1629.
CHENG Guoqing, ZHOU Binghai, LI Lin. Joint modeling and optimization of production, quality control and condition-based maintenance of degraded systems[J]. Computer Integrated Manufacturing Systems, 2019, 25 (7): 1620-1629.
[15] 李玲, 成国庆, 柳炳祥. 基于Gamma过程的加速劣化系统模型及其最优视情维修策略[J]. 计算机集成制造系统, 2013, 19(11): 2922-2927
LI Lin, CHENG Guoqing, LIU Bingxiang. Accelerated degradation system model based on gamma process and its optimal condition-based maintenance strategy[J]. Computer Integrated Manufacturing Systems, 2013, 19(11): 2922-2927
[16] 刘学娟, 冯志鹏. 基于随机系数增长模型的状态维修与EPQ联合优化[J]. 系统工程理论与实践, 2019, 39(1): 251-258
LIU Xuejuan, FENG Zhipeng. State maintenance and EPQ joint optimization based on random coefficient growth model[J]. Systems Engineering-Theory & Practice, 2019, 39(1): 251-258
[17] 刘学娟, 赵斐, 马晓洋. 多产品生产计划与非周期预防维修整合优化模型[J]. 中国管理科学, 2017, 25(11): 189-196
LIU Xuejuan, ZHAO Fei, MAO Xiaoyang. Multi-product production planning and non-periodic prevention and maintenance integration optimization model[J]. Chinese Journal of Management Science, 2017, 25(11): 189-196