再制造过程中再制造品的质量选择及其影响

摘要/Abstract

摘要： 在废旧品回收充足的静态环境下，假设可再制造部分的质量水平在再制造的过程中发生衰减，研究了制造商如何选择再制造品的质量以及如何有效地规划新产品和再制造品的价格。不同的不可再制造部分的质量水平会影响新产品和再制造品的市场需求量，研究表明，随着再制造品质量的不断提高，新产品需求不断降低，再制造品需求不断增加，再制造品对新产品的市场挤兑效应越来越明显，直至将新产品完全挤出市场，形成完全再制造品市场。在此过程中，制造商利润呈现出先凸后凹的增长趋势，其利润在完全再制造品市场时达到最大。

关键词: 再制造, 再制造品, 质量选择

Abstract: Under the assumptions that there are adequate recycling materials and, in the remanufacturing process, the quality of return parts fall off, a study is conducted on how a manufacturer makes the quality selection of the remanufactured products, and how to determine the optimal price of the new products and remanufactured products. It is shown that the variation of quality of the nonremanufactured part has significant effect on the demands of new products and remanufactured products. With the quality continuously improved for the remanufactured products, the demands for new products keep decreasing, while it continuously increases for remanufactured products. The higher the quality of the remanufactured products is, the less demand there is for the new products. This process will continue until the remanufactured products occupy the market. In this process, the increase of the manufacturers profit is fast at first and then slows down. Finally, the manufacturer gains the largest profit when the market is totally occupied by the remanufactured products.

Key words: remanufacturing, remanufactured products, quality selection

邵宝玉，石岿然. 再制造过程中再制造品的质量选择及其影响[J]. 工业工程, 2012, 15(3): 83-86.

Shao Baoyu, Shi Kuiran. Quality Decision of Remanufactured Products and Its Impacts on Remanufacturing Process[J]. Industrial Engineering Journal , 2012, 15(3): 83-86.

参考文献

［1］Fleischmann M, Bloemhof Ruwaard J M, Dekker R, et al. Quantitative models for reverse logistics: A review［J］. European Journal of Operational Research,1997,103(1): 1-17. ［2］Fleischmann M，Krikke H R，Dekker R. A characterization of logistics networks for product recovery［J］. Omega, 2000, 28(6): 653-666. ［3］庾晋, 白杉. 废旧轮胎回收利用现状和利用途径［J］. 橡胶技术与装备,2003, 29(9):11-18. Yu Jin, Bai Shan. Present status of waste tire recycling and its use［J］. China Rubber/Plastics Technology & Equipment,2003,29(9):11-18. ［4］帅长忠. 基于期权的再制造逆向供应链契约协调研究［D］. 南京: 东南大学, 2008. Shuai Changzhong. Coordination with contract based on option［D］. Nanjing: Southeast University,2008. ［5］谢霞, 王宾, 温秉权. 我国逆向物流现状及实施［J］. 物流科技,2010(6): 4-6. Xie Xia, Wang Bin, Wen Bingquan. The present situation and implementation of China’s reverse logistics［J］. Logistics Sci-Teach,2010(6): 4-6. ［6］Hutchens S P. Consumer attitudes toward remanufactured products as a form of recycling［D］. America: University of Arkansas,1982. ［7］赵强, 孙广亿. 企业要重视解决“质量过剩成本”问题［J］. 冶金财会, 2003(5):7-9. ［8］秦振宇. 分析质量成本促进供应商质量控制［J］. 柴油机设计与制造, 2004(4):49-52. Qin Zhenyu.Promotion of supplies quality control by amalysis of quality cost［J］.Design and Manufacture of Diesel Engine,2004(4):49-52. ［9］Ferguson M E, Toktay L B. The effect of competition on recovery strategies［J］. Production and Operations Management,2006,15(3):351-368. ［10］Bayindir Z P, Erkip N, Güllü R. Assessing the benefits of remanufacturing option under oneway substitution and capacity constraint［J］. Computers & Operations Research, 2007, 34 (2):487-514. ［11］曹俊, 熊中楷. 闭环供应链中单个寡头制造商的价格和质量水平决策［J］. 统计与决策, 2009(1):163-165. ［12］Thierry M, Salomon M, Van Nunen J, et al. Strategic issues in product recovery management［J］. California Management Review, 1995, 37(2):114-135. ［13］Karmarkar U, Pitbladdo R U. Internal pricing and cost allocation in a model of multiproduct competition with finite capacity increments［J］. Management Science, 1993, 39(9): 1039-1053. ［14］Cooper R, Ross T W. Product warranties and double moral hazard［J］. The RAND Journal of Economics, 1985, 16(1): 103-113. ［15］但斌, 丁雪峰. 再制造品最优定价及市场挤兑与市场增长效应分析［J］. 系统工程理论与实践, 2010, 30(8): 1371-1379. Dan Bin, Ding Xuefeng. Optimal pricing for the remanufactured products and analyzing the effect of cannibalization and market growth［J］. Systems EngineeringTheory & Practice,2010, 30(8): 1371-1379.

[1]	曹炳汝, 朱博文. 考虑再制造投资的闭环供应链网络均衡模型[J]. 工业工程, 2021, 24(3): 1-9.
[2]	路正南, 杨鹏. 考虑回收品质量可控的再制造闭环供应链决策[J]. 工业工程, 2021, 24(1): 27-34.
[3]	张敏, 李思雨, 石纯来, 廖治通. 基于微分对策的闭环供应链中制造商合作策略选择[J]. 工业工程, 2020, 23(3): 19-29.
[4]	舒秘. 不同渠道结构下再制造商进入对制造商定价的影响[J]. 工业工程, 2020, 23(3): 30-37.
[5]	陈伟达, 史郁洁. 碳交易政策下考虑渠道拓展的制造/再制造企业生产决策研究[J]. 工业工程, 2020, 23(2): 1-8.
[6]	陈伟达, 史文瑾. 资金约束下考虑碳配额质押融资的制造/再制造生产决策研究[J]. 工业工程, 2019, 22(3): 1-8.
[7]	但颖, 代颖, 马祖军. 具有延保服务的闭环供应链回收渠道选择[J]. 工业工程, 2019, 22(2): 42-48.
[8]	杨爱峰, 詹倩颖, 宋明珠, 胡小建. 授权模式下OEM和第三方的生产和回收定价竞争策略[J]. 工业工程, 2019, 22(1): 36-44.
[9]	刘文杰, 沈宁宁, 张璟, 耿孙悦, 朱一格, 刘勇. 考虑渠道权力结构和产品双重差异的再制造闭环供应链最优定价决策[J]. 工业工程, 2018, 21(6): 54-63.
[10]	聂佳佳, 熊璐洁. 新产品质量对闭环供应链再制造模式选择的影响[J]. 工业工程, 2018, 21(5): 31-39,63.
[11]	聂佳佳, 钟玲. 存在绿色消费者的再制造模式选择策略[J]. 工业工程, 2018, 21(2): 9-18.
[12]	杜茂康, 林盼盼, 王强. 基于异质需求的闭环供应链收益共享-费用分担契约协调研究[J]. 工业工程, 2018, 21(1): 30-35,66.
[13]	梁晓豪, 黄祖庆, 孟丽君, 杨玉香. 两个生产阶段下闭环供应链产品定价策略研究[J]. 工业工程, 2017, 20(6): 47-55.
[14]	陈伟达, 毕兴明. 考虑碳税和资金约束制造/再制造生产决策研究[J]. 工业工程, 2017, 20(5): 1-8.
[15]	杨爱峰，万偲，刘林，胡小建. RFID增加回收率的再制造闭环供应链模型[J]. 工业工程, 2016, 19(5): 73-79.