Simulation and Optimization of Micro-Cultivator Packing Line of HTBS

doi:10.3969/j.issn.1007-7375.2019.01.010

Abstract

Abstract: In view of the urgency of improving the productivity of the micro-cultivator in HTBS company, the position operation and process flow of the work-packing line of the micro-cultivator production line are analyzed. According to the data measured by the stopwatch timing method and in combination with the FlexSim simulation technology, the bottleneck of packaging line is analyzed. The Experience ranking method is used to reasonably sort the bottleneck work station and other work stations of the packaging line, in order to balance the load for each station, and build the optimized packing line by FlexSim simulation model to verify its effectiveness. After the optimization of micro-cultivator packaging line, the balance rate of production line increases from 66.67% to 90.77%, and the daily output increases from 354 to 436. The balance optimization effect is obvious.

Key words: packaging line, station, simulation and optimization, FlexSim

CLC Number:

F273

ZHOU Kangqu, YANG Kun, YOU Siqi. Simulation and Optimization of Micro-Cultivator Packing Line of HTBS[J]. Industrial Engineering Journal , 2019, 22(1): 79-84.

References

[1] 王媛. 基于Flexsim的磁极铁芯生产线仿真优化研究[D]. 太原:中北大学, 2017. WANG Yuan. Research on simulation optimization of the production line of pole core based on Flexsim[D]. Taiyuan:North University Of China, 2017.
[2] 朱琼, 陈雪芳, 田世勇, 等. 基于仿真技术的生产线平衡优化研究与应用[J]. 工业工程与管理, 2008, 13(4):110-113 ZHU Qiong, CHEN Xuefang, TIAN Shiyong, et al. The application and research of a simulation-based streamline balance method[J]. Industrial Engineering and Management, 2008, 13(4):110-113
[3] 田凌峰. 基于FLEXSIM的A公司生产线平衡问题优化研究[D]. 成都:成都理工大学, 2017. TIAN Lingfeng. Research on optimization of production line equilibrium problem of Company A based on Flexsim[D]. Chengdu:Chengdu University of Technology, 2017.
[4] 孙先富. 基于Flexsim的混流生产线仿真与优化研究[D]. 河南:河南工业大学, 2011. SUN Xianfu. The studies on simulation and optimization of mixed flow production line based of Flexsim[D]. Henan:Henan University of Technology, 2011.
[5] 宝斯琴塔娜, 陈红霞, 姜广君, 等. 基于FLEXSIM的流水线生产物流优化[J]. 工业工程与管理, 2008, 13(4):106-109 BAO Siqintana, CHEN Hongxia, JIANG Guangjun, et al. Optimizing the logistics of streamline based on software Flexsim[J]. Industrial Engineering and Management, 2008, 13(4):106-109
[6] 龚立雄, 谭国, 黄敏. 基于Flexsim的摩托车涂装生产线仿真与优化研究[J]. 工业工程与管理, 2014, 19(3):122-126 GONG Lixiong, TAN Guo, HUANG Min. Simulation and optimization of motorcycle coating product line based on Flexsim[J]. Industrial Engineering and Management, 2014, 19(3):122-126
[7] 朱小蓉. 基于Flexsim的钢材仓储系统出入库仿真与优化[D]. 成都:西南交通大学, 2012. ZHU Xiaorong. Simulation and optimization of in-out storage of steel warehouse system based on Flexsim[D]. Chengdu:Southwest Jiaotong University, 2012.
[8] GARRIDO J M. Introduction to Flexsim[M]. US:Springer, 2009.
[9] BAI Jianming, PAN Jinhang. The optimization and simulation of automobile production line based on Flexsim[C/OL]. (2011-08-30). International Conference on Management and Service Science, MASS 2011, 2011.
[10] CHEN Hongxia, YANG Dong, SUN Honghua. Simulation research of the mixed-model production line based on Flexsim[C/OL]. (2009-12-04). https://ieeexplore.ieee.org/document/5344303.
[11] 张志勇. 基于产品工序分析的系统组装生产线平衡分析与改善[D]. 上海:上海交通大学, 2011. ZHANG Zhiyong. The methods for solving the problem of balancing an assembly line[D]. Shanghai:Shanghai Jiao Tong University.
[12] 宋小双. 基于IE理论的LY公司生产线平衡改善研究[D]. 成都:西南交通大学, 2012. SONG Xiaoshuang. The improvement research of LY Company's production line balancing base on the theory of IE[D]. Chengdu:Southwest Jiaotong University, 2012.
[13] 秦天保, 周向阳. 实用系统仿真建模与分析——使用Flexsim[M]. 北京:清华大学出版社, 2016.
[14] 杨帆. 基于Flexsim的生产线仿真优化[J]. 物流工程与管理, 2017, 39(12):125-127 YANG Fan. Simulation and optimization for production line based on Flexsim[J]. Logistics Engineering and Management, 2017, 39(12):125-127
[15] 王建青, 邵延君, 刘永姜. 基于Flexsim的炼镁生产线仿真与优化[J]. 工业工程, 2009, 12(2):78-81 WANG Jianqing, SHAO Yanjun, LIU Yongjiang. Simulation and optimization of management smelting process based on Flexsim[J]. Industrial Engineering Journal, 2009, 12(2):78-81