Optimization of Key Process Efficiency of Main Coal Flow Transport System in Coal Mine based on Balanced Production

doi:10.3969/j.issn.1007-7375.e17-1241

Abstract

Abstract:

An efficiency promotion method of main coal flow key process in coal mine is proposed to solve the problem of low efficiency and production imbalance in X coal mine. Teamwork graph is used to find ways to eliminate the bottleneck based on the causes of the bottleneck of the main coal flow system. Serial work is done concurrently and the motions of workers are simplified following economic motion principle. And the frequency of the replacement of workers is adjusted. Finally, working time of each cycle is shortened by 15.82s, which increases the balance rate by 9.52%. Meanwhile, circle time is reduced by 24.06% and daily output is increased by 982.13t. The results show the feasibility and effectiveness of the method.

Key words: key process, production line balance, the man-machine operation analysis, coal mine enterprises transportation system, exhausted work

CLC Number:

F273

YUAN Qinghe, Nie Penghui, JIA Shun, REN Dawei, YU Wentao. Optimization of Key Process Efficiency of Main Coal Flow Transport System in Coal Mine based on Balanced Production[J]. Industrial Engineering Journal , 2018, 21(2): 47-54.

References

[1] 张生瑞, 严宝杰. 交通运输系统协调发展的理论分析[J]. 长安大学学报(自然科学版), 2002, 22(2):51-53.ZHANG Shengrui, YAN Baojie. Analysis of the transportation system coordination[J]. Journal of Chang'an University (Natural Science Edition), 2002, 22(2):51-53.
[2] 车兆学. 安家岭露天煤矿内排开拓运输系统优化[J]. 采矿与安全工程学报, 2007, 24(4):494-497+501.CHE Zhaoxue. Optimization of Internal Dumping Development Haulage System in An Jialing Surface Coal Mine[J]. Journal of Mining & Safety Engineering, 2007, 24(4):494-497+501.
[3] 周伟, 才庆祥, 谢廷堃, 等. 大型近水平露天煤矿转向期间开拓运输系统优化研究[J]. 采矿与安全工程学报, 2008, 25(4):404-408.ZHOU Wei, CAI Qingxiang, XIE Tingkun, et al. Optimization of In-Pit development transport system during transitional period in large open pit mine with flat coal deposit[J]. Journal of Mining & Safe ty Engineering, 2008, 25(4):404-408.
[4] 倪兴华. 安全高效矿井辅助运输关键技术研究与应用[J]. 煤炭学报, 2010, 35(11):1909-1915.NI Xinghua. Research and application of key technology for safety and high efficient mine auxiliary transportation[J]. Journal of China Coal Society, 2010, 35(11):1909-1915.
[5] 陈虹微, 王荣杰. 矿车轮对密封与润滑分析及改进[J]. 润滑与密封, 2006(06):181-182.CHEN Hongwei, WANG Rongjie. Analysis and improvement of sealing and lubrication of wheel wheelsets[J]. Lubricat Ion Engineering, 2006(06):181-182.
[6] 赵红泽, 张瑞新, 秦建明, 甄选. 安家岭露天煤矿运煤卡车通道水平优化研究[J]. 中国矿业大学学报, 2011, 40(6):917-921.ZHAO Hongze, ZHANG Ruixin, QIN Jianming. Optimization of the trench level for the coal truck of an internal waste dump at the An Jialing surface mine[J]. Journal of China University of Mining & Technology, 2011, 40(6):917-921.
[7] 牛占文, 荆树伟, 杨福东. 基于精益管理的制造型企业管理创新驱动因素分析——四家企业的案例研究[J]. 科学学与科学技术管理, 2015(07):116-126.NIU Zhanwen, JING Shuwei, YANG Fudong. An analysis of driving factors of the management innovation of manufacturing enterprises based on lean management:case studies of four enterprises[J]. Science of Science and Management of S. & T., 2015(07):116-126.
[8] 牛占文, 吴秀婷, 岳楼. 基于精益生产的某离合器公司装配车间优化[J]. 工业工程与管理, 2015, 20(2):1-6+32.NIU Zhanwen, WU Xiuting, YUE Lou. Optimization of assembly shop of clutch enterprise based on lean production[J]. Industrial Engineering and Management, 2015, 20(2):1-6+32.
[9] 吉鸿荣. 基于精益思想的企业内部知识链模型优化[J]. 科技进步与对策, 2012, 29(2):141-144.JI Hongrong. Knowledge chain model optimization of inner enterprise based on lean thinking[J]. Science&Technology Progress and Policy, 2012, 29(2):141-144.
[10] 李军, 徐明强. 基于价值流的汽车座椅滑轨生产线分析与改善[J]. 工业工程与管理, 2008, 13(1):122-126.LI Jun, XU Mingqiang, Analysis and improvement of a slippery track production line based on the value flowized[J]. Industrial Engineering and Management, 2008, 13(1):122-126.
[11] 胡适, 蔡厚清. 精益生产成本管理模式在我国汽车企业的运用及优化[J]. 科技进步与对策, 2010, 27(16):78-81.HU Shi, CAI Houqing. The application and optimization of cost management model of lean production in automotive firms[J]. Science&Technology Progress and Policy, 2010, 27(16):78-81.
[12] 陈佳祺, 郭为忠. 基于生产线仿真分析的关键工位诊断与改进设计[J]. 机械设计与研究, 2017, 33(1):83-86.CHEN Jiaqi, GUO Weizhong. Modification design research and diagnosis of key processs based on simulation analysis[J]. Machine Design and Research, 2017, 33(1):83-86.
[13] 刘俨后, 左敦稳, 张丹. 随机作业时间的装配线平衡问题[J]. 计算机集成制造系统, 2014, 20(6):1372-1378.LIU Yanhou, ZUO Dunwen, ZHANG Dan. Assembly line balancing with stochastic operation times[J]. Computer Integrated Manufacturing Systems, 2014, 20(6):1372-1378.
[14] 文龙. C企业液晶屏生产线平衡改善研究[D].成都:西南交通大学,2013.WEN Long. The balance improvement research of C enterprise's LCD screen assembly line[D]. Chengdu:Southwest Jiaotong University,2013.
[15] HEKMATPANAH M. The application of cause and effect diagram in sepahan oil company[J]. World Academy of Science, Engineering and Technology, 2011, 78:537-541.
[16] 易树平, 郭伏主编.基础工业工程[M]. 北京:机械工业出版社, 2006.
[17] ALMOMANI M A, ALADEEMY M, ABDELHADI A, et al. A proposed approach for setup time reduction through integrating conventional SMED method with multiple criteria decision-making techniques[J]. Computers & Industrial Engineering, 2013, 66(2):461-469.